Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level I

Wheel Base	41.5 in 1054 mm
Length - With Bucket on Ground	127.3 in 3234 mm
Length - Without Bucket	99.4 in 2524 mm
Height - Top of Cab	79.8 in 2028 mm
Vehicle Width over Tires	58.9 in 1497 mm
Maximum Overall Height	143.8 in 3652 mm
Bucket Pin Height - Maximum Lift	110.9 in 2818 mm
Bucket Pin Height - Carry Position	8.5 in 215 mm
Reach - Maximum Lift/Dump	21 in 533 mm
Clearance at Maximum Lift and Dump	81.8 in 2077 mm
Ground Clearance	6.9 in 175 mm
Departure Angle	27.9°
Maximum Dump Angle	46.7°
Rack Back Angle - Maximum Height	88.9°
Bumper Overhang - Behind Rear Axle	35.2 in 8944 mm
Turning Radius from Center - Bucket	77.8 in 1977 mm
Maximum Reach - With Arms Parallel to Ground	50.7 in 1288 mm
Turning Radius from Center - Machine Rear	59.6 in 1513 mm
Turning Radius from Center - Coupler	43.5 in 1104 mm
Note	* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).

Gross Power - SAE J1995	67.1 HP 50.1 kW
Net Power - SAE 1349	65.8 HP 49.1 kW
Displacement	134.3 in³ 2.2 l
Stroke	3.9 in 100 mm
Bore	3.3 in 84 mm
Engine Model	Cat C2.2 CRDI
Peak Torque - 1,500 rpm - SAE J1995	153 ft·lbf 208 N·m
Net Power - ISO 9249	66.5 HP 49.6 kW

Hydraulic Flow - Standard - Loader Hydraulic Pressure	3336 psi 23000 kPa
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure	3336 psi 23000 kPa
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	33.5 HP 26.5 kW
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)	50.9 HP 38 kW
Hydraulic Flow - Standard - Loader Hydraulic Flow	18 gal/min 69 l/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow	26 gal/min 99 l/min

Outside Cab***	102 dB(A) 102 dB(A)
Inside Cab**	83 dB(A) 83 dB(A)
Note (3)	***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)	**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Rated Operating Capacity	1550 lb 705 kg
Rated Operating Capacity with Optional Counterweight	1650 lb 750 kg
Tipping Load	3100 lb 1410 kg
Breakout Force - Tilt Cylinder	3927 lb 1781 kg
Note	* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).

Travel Speed - Forward or Reverse - One Speed	7.6 mile/h 12.3 km/h
Travel Speed - Forward or Reverse - Two Speed Option	11.1 mile/h 17.8 km/h

Chain Box - Each Side	1.8 gal (US) 7 l
Cooling System	3.2 gal (US) 12 l
Engine Crankcase	2.6 gal (US) 10 l
Fuel Tank	15.1 gal (US) 57 l
Hydraulic System	11.9 gal (US) 45 l
Hydraulic Tank	9 gal (US) 34 l

Operating Weight	5849 lb 2653 kg
Note	* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).