Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level I

Wheel Base	43.5 in 1105 mm
Height - Top of Cab	82 in 2082 mm
Vehicle Width over Tires	66 in 1676 mm
Ground Clearance	7.7 ft 195 mm
Departure Angle	26°
Maximum Dump Angle	48°
Maximum Reach - With Arms Parallel to Ground	53.3 in 1353 mm
Turning Radius from Center - Machine Rear	64.5 in 1639 mm
Bucket Pin Height - Maximum Lift	122.9 in 3122 mm
Length - Without Bucket	108.9 in 2767 mm
Rack Back Angle - Maximum Height	91°
Turning Radius from Center - Bucket	83 in 2107 mm
Turning Radius from Center - Coupler	51.8 in 1314 mm
Clearance at Maximum Lift and Dump	92.9 in 2359 mm
Reach - Maximum Lift/Dump	16 in 408 mm
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Bumper Overhang - Behind Rear Axle	40.2 in 1021 mm
Maximum Overall Height	156.6 in 3977 mm
Length - With Bucket on Ground	137.3 in 3487 mm
Bucket Pin Height - Carry Position	7.5 in 190 mm

Gross Power - SAE J1995	74.3 HP 55.4 kW
Net Power - SAE 1349	73.2 HP 54.6 kW
Displacement	203 in³ 3.3 l
Stroke	4.7 in 120 mm
Bore	3.7 in 94 mm
Net Flywheel Power	73.2 HP 54.6 kW
Engine Model	Cat 3.3B DIT (turbo)
Peak Torque - 1,500 rpm - SAE J1995	195 ft·lbf 265 N·m
Net Power - ISO 9249	73.9 HP 55.1 kW

Hydraulic Flow - Standard - Loader Hydraulic Flow	20 gal/min 76 l/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure	3335 psi 23000 kPa
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	39 HP 29 kW
Hydraulic Flow - Standard - Loader Hydraulic Pressure	3335 psi 23000 kPa
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow	30 gal/min 112 l/min
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)	58 HP 43 kW

Outside Cab**	101 dB(A)
Note (2)	*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3)	**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab*	83 dB(A)
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Rated Operating Capacity	1800 lb 820 kg
Tipping Load	3600 lb 1635 kg
Breakout Force - Tilt Cylinder	5003 lb 2269 kg
Rated Operating Capacity with Optional Counterweight	2000 lb 910 kg
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Travel Speed - Forward or Reverse - Two Speed Option	10.6 mile/h 17.1 km/h
Travel Speed - Forward or Reverse - One Speed	7 mile/h 11.2 km/h

Chain Box - Each Side	2.3 gal (US) 8.8 l
Cooling System	3.7 gal (US) 14 l
Engine Crankcase	3 gal (US) 11 l
Fuel Tank	24.8 gal (US) 94 l
Hydraulic System	13.2 gal (US) 50 l
Hydraulic Tank	10.3 gal (US) 39 l

Operating Weight	6567 lb 2979 kg
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).