LOCATIONS InsideTRAC TRAINING EMPLOYMENT

New CAT Equipment

Skid Steer Loaders 262D3

Built for tough work, the Caterpillar® Skid Steer Loaders incorporate big iron features. These machines deliver Cat reliability, durability, and efficient operation, even in the toughest working conditions.

Skid Steer Loaders 262D3

Built for tough work, the Caterpillar® Skid Steer Loaders incorporate big iron features. These machines deliver Cat reliability, durability, and efficient operation, even in the toughest working conditions.
Units: USMetric

Air Conditioning System (if equipped)

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.
Units: USMetric

Cab

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
Units: USMetric

Dimensions

Wheel Base 49.2 in 1249 mm
Length - With Bucket on Ground 146.2 in 3714 mm
Length - Without Bucket 117.9 in 2995 mm
Height - Top of Cab 83.1 in 2110 mm
Vehicle Width over Tires 66 in 1676 mm
Maximum Overall Height 157.8 in 4008 mm
Bucket Pin Height - Maximum Lift 124.9 in 3172 mm
Bucket Pin Height - Carry Position 7.9 in 200 mm
Reach - Maximum Lift/Dump 30.9 in 786 mm
Clearance at Maximum Lift and Dump 93.7 in 2380 mm
Ground Clearance 8.9 in 226 mm
Departure Angle 26°
Bumper Overhang - Rear Axle 42.6 in 1083 mm
Maximum Dump Angle 51°
Rack Back Angle - Maximum Height 84°
Bucket Pin Reach - Maximum Lift 15.5 in 393 mm
Turning Radius from Center - Bucket 85.9 in 2181 mm
Turning Radius from Center - Coupler 55.2 in 1401 mm
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Maximum Reach - With Arms Parallel to Ground 50.9 in 1293 mm
Turning Radius from Center - Machine Rear 71.1 in 1805 mm
Units: USMetric

Engine

Gross Power - SAE J1995 74.3 HP 55.4 kW
Net Power - SAE 1349 72.9 HP 54.4 kW
Displacement 203 in³ 3.3 l
Stroke 4.7 in 120 mm
Bore 3.7 in 94 mm
Peak Torque - 1,500 rpm - SAE J1995 195 ft·lbf 265 N·m
Net Power - ISO 9249 73.7 HP 54.9 kW
Engine Model Cat C3.3B DIT (turbo)
Net Flywheel Power 72.9 HP 54.4 kW
Units: USMetric

Hydraulic System

Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure 4061 psi 28000 kPa
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) 76 HP 57 kW
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 44 HP 33 kW
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3335 psi 23000 kPa
Hydraulic Flow - Standard - Loader Hydraulic Flow 23 gal/min 86 l/min
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow 32 gal/min 121 l/min
Units: USMetric

Noise Level

Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Inside Cab* 81 dB(A) 81 dB(A)
Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Outside Cab** 101 dB(A) 101 dB(A)
Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Units: USMetric

Operating Specifications

Rated Operating Capacity 2700 lb 1225 kg
Rated Operating Capacity with Optional Counterweight 3055 lb 1390 kg
Tipping Load 5400 lb 2455 kg
Breakout Force - Tilt Cylinder 7355 lb 3336 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Units: USMetric

Power Train

Travel Speed - Forward or Reverse - Two Speed Option 11 mile/h 17.7 km/h
Travel Speed - Forward or Reverse - One Speed 7.7 mile/h 12.5 km/h
Units: USMetric

Service Refill Capacities

Chain Box - Each Side 3.3 gal (US) 12.7 l
Cooling System 3.7 gal (US) 14 l
Engine Crankcase 3 gal (US) 11 l
Fuel Tank 27.7 gal (US) 105 l
Hydraulic System 13.7 gal (US) 52 l
Hydraulic Tank 10.3 gal (US) 39 l
Units: USMetric

Weights

Operating Weight 8296 lb 3763 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
ELECTRICAL
12 volt Electrical System
OPERATOR ENVIRONMENT
Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD screen; Advanced Multi-operator Security System; On-screen Adjustments for Implement Response, Hystat Response and Creep Control
POWER TRAIN
Cat C3.3B, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V Emission Standards
OTHER
Engine Enclosure, Lockable
MANDATORY EQUIPMENT
Hydraulics, Standard or High Flow XPS

Request A Quote

© 2020 Toromont Industries Ltd. All Rights Reserved.
Copyright   Privacy Statement   Policies