Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level I

Wheel Base	54.6 in 1386 mm
Height - Top of Cab	82.4 in 2094 mm
Vehicle Width over Tires	72 in 1829 mm
Ground Clearance	8.9 in 226 mm
Departure Angle	27°
Maximum Dump Angle	51°
Bucket Pin Reach - Maximum Lift	14.7 in 374 mm
Bucket Pin Height - Maximum Lift	127.1 in 3229 mm
Turning Radius from Center - Machine Rear	74.7 in 1899 mm
Reach - Maximum Lift/Dump	30.3 in 769 mm
Bumper Overhang - Behind Rear Axle	46.2 in 1175 mm
Length - Without Bucket	127.6 in 3242 mm
Maximum Overall Height	160.1 in 4067 mm
Turning Radius from Center - Coupler	58.3 in 1482 mm
Maximum Reach - With Arms Parallel to Ground	50.5 in 1282 mm
Clearance at Maximum Lift and Dump	96 in 2438 mm
Length - With Bucket on Ground	155.7 in 3954 mm
Bucket Pin Height - Carry Position	7.8 in 198 mm
Turning Radius from Center - Bucket (racked)	89.8 in 2280 mm
Rack Back Angle - Maximum Height	84°
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA battery, 1883 mm (74 in) low profile bucket, no optional counterweights, Cat PC 12 × 16.5 tires and manual quick coupler (unless otherwise noted).
Roll Back Angle	28°

Gross Power - SAE J1995	98 HP 73 kW
Net Power - SAE 1349	95 HP 71 kW
Displacement	232 in³ 3.8 l
Stroke	4.7 in 120 mm
Bore	3.9 in 100 mm
Peak Torque - 1,500 rpm - SAE J1995	246 ft·lbf 334 N·m
Engine Model	Cat C3.8 DIT (turbo)
Net Power - ISO 9249	96 HP 71 kW
Net Flywheel Power	95 HP 71 kW

Hydraulic Flow - Standard - Loader Hydraulic Flow	23 gal/min 86 l/min
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)	76 HP 57 kW
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	44 HP 33 kW
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow	32 gal/min 121 l/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure	3335 psi 23000 kPa
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure	4061 psi 28000 kPa

Outside Cab**	102 dB(A)
Note (2)	*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Inside Cab*	83 dB(A)
Note (3)	**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Rated Operating Capacity	3450 lb 1570 kg
Tipping Load	6900 lb 3135 kg
Breakout Force - Tilt Cylinder	7443 lb 3376 kg
Breakout Force - Lift Cylinder	6074 lb 2755 kg
Rated Operating Capacity with Optional Counterweight	3690 lb 1675 kg
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA battery, 1883 mm (74 in) low profile bucket, no optional counterweights, Cat PC 12 × 16.5 tires and manual quick coupler (unless otherwise noted).

Travel Speed - Forward or Reverse - One Speed	6.6 mile/h 10.6 km/h
Travel Speed - Forward or Reverse - Two Speed Option	9.4 mile/h 15.1 km/h

Cooling System	4.1 gal (US) 16 l
Engine Crankcase	3.5 gal (US) 13 l
Fuel Tank	31.7 gal (US) 120 l
Hydraulic System	14.5 gal (US) 55 l
Hydraulic Tank	10.3 gal (US) 39 l
Chain Box - Each Side	2.7 gal (US) 10.2 l
Diesel Exhaust Fluid (DEF) Tank	5 gal (US) 19 l

Operating Weight	9133 lb 4143 kg
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA battery, 1883 mm (74 in) low profile bucket, no optional counterweights, Cat PC 12 × 16.5 tires and manual quick coupler (unless otherwise noted).