Skip to content

New CAT Equipment

Connect with our experts and get industry leading support and solutions for all your needs.

phone number1-866-606-1372

Give us a call Mon - Fri 8:00AM - 5:00PM

Connect with our experts and get industry leading support and solutions for all your needs.

Give us a call

Mon - Fri 8:00AM - 5:00PM

Compact Track Loaders 239D3

Cat® Compact Track Loaders feature a steel embedded track and steel undercarriage components for maximum life in applications where maintenance, operator technique and underfoot conditions may not be ideally suited for a Multi Terrain Loader or Skid Steer Loader.
Compact Track Loaders

Compact Track Loaders 239D3

Cat® Compact Track Loaders feature a steel embedded track and steel undercarriage components for maximum life in applications where maintenance, operator technique and underfoot conditions may not be ideally suited for a Multi Terrain Loader or Skid Steer Loader.
Units: USMetric
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Units: USMetric
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
Units: USMetric
Vehicle Width (320 mm/12.6 in tracks) 66 in 1676 mm
Length - With Bucket on Ground 127.3 in 3234 mm
Length - Without Bucket 99.3 in 2522 mm
Maximum Reach - With Arms Parallel to Ground 53.4 in 1356 mm
Turning Radius from Center - Bucket 81.5 in 2069 mm
Overall Length - Track 71.2 in 1808 mm
Reach - Maximum Lift/Dump 22.2 in 563 mm
Vehicle Width (400 mm/15.7 in tracks) 69.1 in 1756 mm
Maximum Overall Height 143.5 in 3645 mm
Bucket Pin Height - Carry Position 8.6 in 218 mm
Length - Track on Ground 54.5 in 1384 mm
Clearance at Maximum Lift and Dump 81 in 2057 mm
Bucket Pin Height - Maximum Lift 111.2 in 2825 mm
Departure Angle 34.5°
Rack Back Angle - Maximum Height 85.5°
Turning Radius from Center - Coupler 45.6 in 1159 mm
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Height - Top of Cab 80.1 in 2034 mm
Maximum Dump Angle 50.3°
Turning Radius from Center - Machine Rear 57.4 in 1458 mm
Units: USMetric
Gross Power - SAE J1995 67.1 HP 50.1 kW
Displacement 134.3 in³ 2.2 l
Bore 3.3 in 84 mm
Stroke 3.9 in 100 mm
Peak Torque - 1,500 rpm - SAE J1995 153 ft·lbf 208 N·m
Net Power - SAE 1349 65.8 HP 49.1 kW
Engine Model Cat C2.2 CRDI
Units: USMetric
Hydraulic Flow - High Flow - Loader Hydraulic Flow 26 gal/min 99 l/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3336 psi 23000 kPa
Hydraulic Flow - Standard - Loader Hydraulic Flow 18 gal/min 69 l/min
Hydraulic Flow - High Flow - Loader Hydraulic Pressure 3336 psi 23000 kPa
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 50.9 HP 38 kW
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 35.5 HP 26.5 kW
Units: USMetric
Note (2) **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Outside Cab*** 103 dB(A) 103 dB(A)
Note (3) ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Inside Cab** 83 dB(A) 83 dB(A)
Units: USMetric
Rated Operating Capacities - 35% Tipping Load 1530 lb 695 kg
Tipping Load 4370 lb 1985 kg
Breakout Force - Tilt Cylinder 3913 lb 1775 kg
Rated Operating Capacity with Optional Counterweight 2400 lb 1090 kg
Ground Contact Area - With 320 mm/12.6 in Track 1373 in² 0.89 m²
Ground Pressure - With 320 mm/12.6 in Track 5.4 psi 37.3 kPa
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Ground Contact Area - With 400 mm/15.7 in Track 1716 in² 1.11 m²
Ground Pressure - With 400 mm/15.7 in Track 4.4 psi 30.6 kPa
Rated Operating Capacities - 50% Tipping Load 2185 lb 995 kg
Units: USMetric
Travel Speed - Forward or Reverse - Two Speed 7.6 mile/h 12.2 km/h
Travel Speed - Forward or Reverse - One Speed 5 mile/h 8.1 km/h
Units: USMetric
Cooling System 3.2 Gal 12 l
Engine Crankcase 2.6 gal (US) 10 l
Fuel Tank 15.1 gal (US) 57 l
Hydraulic Tank 9 Gal 34 l
Units: USMetric
Operating Weight 7434 lb 3372 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
ELECTRICAL
12 volt Electrical System
OPERATOR ENVIRONMENT
Gauges: Fuel Level, Hour Meter
POWER TRAIN
Cat C2.2, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V emission standards
OTHER
Engine Enclosure, Lockable
MANDATORY EQUIPMENT
Hydraulics, Standard or High Flow

2021 Machine Attachment Discounts Web Banner

2022CustomerTestimonialsBannerEN

Featured Attachments

Caterpillar Attachments enhance the productivity and utility of Caterpillar machines, equipping them for a wide range of tasks and operating requirements, and providing total system solutions for any job application.

Request A Quote

Success! Thanks for filling out our form! Loading animation
Toromont Industries Ltd. All Rights Reserved.
Copyright   Privacy Statement   Policies   Accessibility   Supplier Code of Conduct