Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level I

Length - Track on Ground	54.5 in 1384 mm
Overall Length - Track	71.2 in 1808 mm
Height - Top of Cab	80.3 in 2039 mm
Ground Clearance	7.6 in 194 mm
Departure Angle	34.5°
Maximum Dump Angle	48°
Vehicle Width (400 mm/15.7 in tracks)	69.1 in 1756 mm
Length - With Bucket on Ground	127.3 in 3233 mm
Maximum Overall Height	150.8 in 3831 mm
Bucket Pin Height - Carry Position	8.6 in 219 mm
Maximum Reach - With Arms Parallel to Ground	51.8 in 1317 mm
Length - Without Bucket	99.3 in 2523 mm
Turning Radius from Center - Machine Rear	57.4 in 1458 mm
Bucket Pin Height - Maximum Lift	118.2 in 3002 mm
Clearance at Maximum Lift and Dump	88.7 in 2253 mm
Vehicle Width (320 mm/12.6 in tracks)	66 in 1676 mm
Turning Radius from Center - Coupler	45.7 in 1160 mm
Reach - Maximum Lift/Dump	28.6 in 727 mm
Rack Back Angle - Maximum Height	87.5°
Turning Radius from Center - Bucket	81.1 in 2060 mm
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C0 cab (OROPS, static seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Bucket Pin Reach - Maximum Lift	12.2 in 311 mm

Gross Power - SAE J1995	67.1 HP 50.1 kW
Displacement	134.3 in³ 2.2 l
Bore	3.3 in 84 mm
Stroke	3.9 in 100 mm
Net Power - ISO 9249	66.5 HP 49.6 kW
Net Power	65.8 HP 49.1 kW
Net Power - SAE 1349	65.8 HP 49.1 kW
Peak Torque - 1,500 rpm - SAE J1995	153 ft·lbf 208 N·m
Engine Model	Cat C2.2 CRDI

Hydraulic Flow - Standard - Loader Hydraulic Pressure	3336 psi 23000 kPa
Hydraulic Flow - High Flow - Loader Hydraulic Flow	26 gal/min 99 l/min
Hydraulic Flow - High Flow - Loader Hydraulic Pressure	3336 psi 23000 kPa
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)	50.9 HP 38 kW
Hydraulic Flow - Standard - Loader Hydraulic Flow	18 gal/min 69 l/min
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	35.5 HP 26.5 kW

Outside Cab***	103 dB(A) 103 dB(A)
Inside Cab**	83 dB(A) 83 dB(A)
Note (3)	***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (2)	**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Rated Operating Capacities - 35% Tipping Load	1740 lb 790 kg
Tipping Load	4970 lb 2260 kg
Breakout Force - Tilt Cylinder	3907 lb 1772 kg
Ground Contact Area - With 320 mm/12.6 in Track	1373 in² 0.89 m²
Ground Pressure - With 320 mm/12.6 in Track	5.7 psi 39.3 kPa
Ground Contact Area - With 400 mm/15.7 in Track	1716 in² 1.11 m²
Ground Pressure - With 400 mm/15.7 in Track	4.7 psi 32.2 kPa
Rated Operating Capacities - 50% Tipping Load	2485 lb 1130 kg
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C0 cab (OROPS, static seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Rated Operating Capacity with Optional Counterweight	2700 lb 1225 kg

Travel Speed - Forward or Reverse - One Speed	5 mile/h 8.1 km/h
Travel Speed - Forward or Reverse - Two Speed	7.6 mile/h 12.2 km/h

Engine Crankcase	2.6 gal (US) 10 l
Fuel Tank	15.1 gal (US) 57 l
Hydraulic System	11.9 gal (US) 45 l
Cooling System	3.2 gal (US) 12 l
Hydraulic Tank	9 gal (US) 34 l

Operating Weight	7831 lb 3552 kg
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C0 cab (OROPS, static seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).