Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level I

Length - Track on Ground	59 in 1499 mm
Overall Length - Track	78.7 in 1999 mm
Height - Top of Cab	83.1 in 2111 mm
Departure Angle	35°
Maximum Dump Angle	52°
Bucket Pin Height - Carry Position	7.8 in 198 mm
Vehicle Width (400 mm/15.7 in tracks)	69 in 1755 mm
Turning Radius from Center - Coupler	54.8 in 1392 mm
Bucket Pin Reach - Maximum Lift	9.4 in 238 mm
Vehicle Width (320 mm/12.6 in tracks)	66 in 1676 mm
Maximum Reach - With Arms Parallel to Ground	51.4 in 1305 mm
Maximum Overall Height	154.1 in 3915 mm
Turning Radius from Center - Bucket	86 in 2184 mm
Bucket Pin Height - Maximum Lift	121 in 3075 mm
Length - Without Bucket	108.9 in 2767 mm
Rack Back Angle - Maximum Height	87°
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Turning Radius from Center - Machine Rear	61.5 in 1561 mm
Length - With Bucket on Ground	137.3 in 3486 mm
Clearance at Maximum Lift and Dump	89.9 in 2283 mm
Reach - Maximum Lift/Dump	23.9 in 608 mm

Gross Power - SAE J1995	74.3 HP 55.4 kW
Displacement	203 in³ 3.3 l
Bore	3.7 in 94 mm
Engine Model	Cat C3.3B DIT (turbo)
Net Power - SAE 1349	73.2 HP 54.6 kW
Stroke	4.7 in 120 mm
Peak Torque - 1,500 rpm - SAE J1995	195 ft·lbf 265 N·m

Hydraulic Flow - High Flow - Loader Hydraulic Pressure	3335 psi 23000 kPa
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)	58 HP 43 kW
Hydraulic Flow - Standard - Loader Hydraulic Pressure	3335 psi 23000 kPa
Hydraulic Flow - Standard - Loader Hydraulic Flow	20 gal/min 76 l/min
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	39 HP 29 kW
Hydraulic Flow - High Flow - Loader Hydraulic Flow	30 gal/min 112 l/min

Note (3)	***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab***	103 dB(A) 103 dB(A)
Inside Cab**	83 dB(A) 83 dB(A)
Note (2)	**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Rated Operating Capacities - 35% Tipping Load	2010 lb 915 kg
Tipping Load	5745 lb 2610 kg
Breakout Force - Tilt Cylinder	4965 lb 2252 kg
Ground Contact Area - With 320 mm/12.6 in Track	1483 in² 0.96 m²
Ground Pressure - With 320 mm/12.6 in Track	6.1 psi 41.8 kPa
Rated Operating Capacities - 50% Tipping Load	2870 lb 1305 kg
Ground Contact Area - With 400 mm/15.7 in Track	1848 in² 1.19 m²
Rated Operating Capacity with Optional Counterweight	3060 lb 1390 kg
Ground Pressure - With 400 mm/15.7 in Track	4.9 psi 34 kPa
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Travel Speed - Forward or Reverse - One Speed	5.9 mile/h 9.5 km/h
Travel Speed - Forward or Reverse - Two Speed	8.5 mile/h 13.7 km/h

Fuel Tank	24.8 Gal 94 l
Engine Crankcase	3 Gal 11 l
Hydraulic Tank	10.3 Gal 39 l
Cooling System	3.7 Gal 14 l

Operating Weight	8987 lb 4076 kg
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).