Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level I

Length - Track on Ground	64.2 in 1630 mm
Overall Length - Track	83.8 in 2129 mm
Height - Top of Cab	83.2 in 2113 mm
Ground Clearance	8.9 in 226 mm
Departure Angle	32°
Maximum Dump Angle	39°
Bucket Pin Height - Carry Position	7.8 in 198 mm
Turning Radius from Center - Machine Rear	70.7 in 1796 mm
Turning Radius from Center - Coupler	55.5 in 1410 mm
Maximum Overall Height	159.5 in 4051 mm
Maximum Reach - With Arms Parallel to Ground	54 in 1373 mm
Turning Radius from Center - Bucket	88.8 in 2256 mm
Bucket Pin Height - Maximum Lift	124.9 in 3173 mm
Length - With Bucket on Ground	146.2 in 3714 mm
Length - Without Bucket	117.9 in 2995 mm
Reach - Maximum Lift/Dump	22.6 in 575 mm
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Clearance at Maximum Lift and Dump	97.8 in 2485 mm
Vehicle Width (450 mm/17.7 in tracks)	78 in 1981 mm
Rack Back Angle - Maximum Height	84°

Gross Power - SAE J1995	74.3 HP 55.4 kW
Net Power - SAE 1349	72.9 HP 54.4 kW
Displacement	203 in³ 3.3 cm³
Bore	3.7 in 94 mm
Stroke	4.7 in 120 mm
Peak Torque - 1,500 rpm - SAE J1995	195 ft·lbf 265 N·m
Net Power	72.9 HP 54.4 kW
Note	Net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler/aftertreatment and cooling fan.
Gross Power	74.3 HP 55.4 kW
Engine Model	Cat C3.3B DIT (turbo)
Net Power - ISO 9249	73.7 HP 54.9 kW

Hydraulic Flow - Standard - Loader Hydraulic Pressure	3335 psi 23000 kPa
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow	32 gal/min 121 l/min
Hydraulic Flow - Standard - Loader Hydraulic Flow	23 psi 86 kPa
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	44 HP 33 kW
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure	4061 HP 28000 kW
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)	76 HP 57 kPa

Note (2)	**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Outside Cab***	103 dB(A) 103 dB(A)
Note (3)	***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab**	83 dB(A) 83 dB(A)
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Rated Operating Capacities - 35% Tipping Load	2220 lb 1010 kg
Tipping Load	6345 lb 2885 kg
Breakout Force - Tilt Cylinder	7285 lb 3304 kg
Rated Operating Capacities - 50% Tipping Load	3170 lb 1445 kg
Ground Contact Area - With 450 mm/17.7 in Track	2272 in² 1.47 m²
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Rated Operating Capacity with Optional Counterweight	3390 lb 1540 kg
Ground Pressure - With 450 mm/17.7 in Track	4.4 psi 30.4 kPa

Travel Speed - Forward or Reverse - Two Speed	8.3 mile/h 13.3 km/h
Travel Speed - Forward or Reverse - One Speed	4.5 mile/h 7.2 km/h

Hydraulic System	13.7 gal (US) 52 l
Hydraulic Tank	10.3 gal (US) 39 l
Fuel Tank	27.7 gal (US) 105 l
Engine Crankcase	3 gal (US) 11 l
Cooling System	3.7 gal (US) 14 l

Operating Weight	10095 lb 4579 kg
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).