Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level I

Length - Track on Ground	69.6 in 1767 mm
Overall Length - Track	89.4 in 2270 mm
Height - Top of Cab	83.6 in 2125 mm
Ground Clearance	9.6 in 245 mm
Departure Angle	33°
Maximum Dump Angle	54°
Vehicle Width (450 mm/17.7 in tracks)	78 in 1981 mm
Turning Radius from Center - Coupler	58.1 in 1476 mm
Rack Back Angle - Maximum Height	81°
Reach - Maximum Lift/Dump	33.6 in 852 mm
Vehicle Width (400 mm/15.7 in tracks)	76 in 1931 mm
Bucket Pin Reach - Maximum Lift	19.4 in 493 mm
Bucket Pin Height - Carry Position	7.1 in 180 mm
Turning Radius from Center - Bucket (racked)	91.1 in 2314 mm
Maximum Reach - With Arms Parallel to Ground	51.9 in 1319 mm
Length - Without Bucket	125.5 in 3189 mm
Length - With Bucket on Ground	154.7 in 3931 mm
Clearance at Maximum Lift and Dump	94.5 in 2399 mm
Bucket Pin Height - Maximum Lift	126.3 in 3208 mm
Maximum Overall Height	158.7 in 4032 mm
Roll Back Angle	25°
Turning Radius from Center - Machine Rear	74 in 1881 mm
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 850 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted).

Gross Power - SAE J1995	98 HP 73 kW
Net Power - SAE 1349	95 HP 71 kW
Displacement	232 in³ 3.8 l
Bore	3.9 in 100 mm
Stroke	4.7 in 120 mm
Net Power	95 HP 71 kW
Net Power - ISO 9249	95 HP 71 kW
Engine Model	Cat C3.8 DIT (turbo)
Peak Torque - 1,500 rpm - SAE J1995	246 ft·lbf 334 N·m

Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure	4061 psi 28000 kPa
Hydraulic Flow - Standard - Loader Hydraulic Pressure	3335 psi 23000 kPa
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	44 HP 33 kW
Hydraulic Flow - Standard - Loader Hydraulic Flow	23 gal/min 86 l/min
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow	32 gal/min 121 l/min
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)	76 HP 57 kW

Note (2)	*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Inside Cab*	83 dB(A) 83 dB(A)
Note (3)	**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Outside Cab**	104 dB(A) 104 dB(A)

Rated Operating Capacities - 35% Tipping Load	3480 lb 1580 kg
Tipping Load	9945 lb 4520 kg
Breakout Force - Tilt Cylinder	7270 lb 3298 kg
Breakout Force - Lift Cylinder	6162 lb 2795 kg
Rated Operating Capacity with Optional Counterweight	5240 lb 2380 kg
Ground Contact Area - With 400 mm/15.7 in Track	2184 in² 1.41 m²
Ground Pressure - With 400 mm/15.7 in Track	5.3 psi 36.4 kPa
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 850 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted).
Rated Operating Capacities - 50% Tipping Load	4970 lb 2255 kg
Ground Contact Area - With 450 mm/17.7 in Track	2463 in² 1.59 m²
Ground Pressure - With 450 mm/17.7 in Track	4.7 psi 32.1 kPa

Travel Speed - Forward or Reverse - Two Speed	8.4 mile/h 13.5 km/h
Travel Speed - Forward or Reverse - One Speed	5.2 mile/h 8.4 km/h

Cooling System	4.1 Gal 16 l
Engine Crankcase	3.5 gal (US) 13 l
Fuel Tank	31.7 gal (US) 120 l
Hydraulic System	14.5 gal (US) 55 l
Hydraulic Tank	10.3 gal (US) 39 l
Diesel Exhaust Fluid (DEF) Tank	5 gal (US) 19 l

Operating Weight

11464 lb 5200 kg

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 850 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted).