New CAT Equipment

Skid Steer Loaders 236D3

Built for tough work, the Caterpillar® Skid Steer Loaders incorporate big iron features. These machines deliver Cat reliability, durability, and efficient operation, even in the toughest working conditions.
236D3

Skid Steer Loaders 236D3

Built for tough work, the Caterpillar® Skid Steer Loaders incorporate big iron features. These machines deliver Cat reliability, durability, and efficient operation, even in the toughest working conditions.
Units: USMetric

Air Conditioning System (if equipped)

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Units: USMetric

Cab

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
Units: USMetric

Dimensions

Wheel Base 43.5 in 1105 mm
Height - Top of Cab 82 in 2082 mm
Vehicle Width over Tires 66 in 1676 mm
Ground Clearance 7.7 in 195 mm
Departure Angle 26°
Maximum Dump Angle 48°
Maximum Reach - With Arms Parallel to Ground 53.3 in 1353 mm
Turning Radius from Center - Machine Rear 64.5 in 1639 mm
Bucket Pin Height - Maximum Lift 122.9 in 3122 mm
Length - Without Bucket 108.9 in 2767 mm
Rack Back Angle - Maximum Height 91°
Turning Radius from Center - Bucket 83 in 2107 mm
Turning Radius from Center - Coupler 51.8 in 1314 mm
Clearance at Maximum Lift and Dump 92.9 in 2359 mm
Reach - Maximum Lift/Dump 16 in 408 mm
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Bumper Overhang - Behind Rear Axle 40.2 in 1021 mm
Maximum Overall Height 156.6 in 3977 mm
Length - With Bucket on Ground 137.3 in 3487 mm
Bucket Pin Height - Carry Position 7.5 in 190 mm
Units: USMetric

Engine

Gross Power - SAE J1995 74.3 HP 55.4 kW
Net Power - SAE 1349 73.2 HP 54.6 kW
Displacement 203 in³ 3.3 l
Stroke 4.7 in 120 mm
Bore 3.7 in 94 mm
Net Flywheel Power 73.2 HP 54.6 kW
Engine Model Cat 3.3B DIT (turbo)
Peak Torque - 1,500 rpm - SAE J1995 195 ft·lbf 265 N·m
Net Power - ISO 9249 73.9 HP 55.1 kW
Units: USMetric

Hydraulic System

Hydraulic Flow - Standard - Loader Hydraulic Flow 20 gal/min 76 l/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure 3335 psi 23000 kPa
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 39 HP 29 kW
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3335 psi 23000 kPa
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow 30 gal/min 112 l/min
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 58 HP 43 kW
Units: USMetric

Noise Level

Outside Cab** 101 dB(A)
Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab* 83 dB(A)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Units: USMetric

Operating Specifications

Rated Operating Capacity 1800 lb 820 kg
Tipping Load 3600 lb 1635 kg
Breakout Force - Tilt Cylinder 5003 lb 2269 kg
Rated Operating Capacity with Optional Counterweight 2000 lb 910 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Units: USMetric

Power Train

Travel Speed - Forward or Reverse - Two Speed Option 10.6 mile/h 17.1 km/h
Travel Speed - Forward or Reverse - One Speed 7 mile/h 11.2 km/h
Units: USMetric

Service Refill Capacities

Chain Box - Each Side 2.3 gal (US) 8.8 l
Cooling System 3.7 gal (US) 14 l
Engine Crankcase 3 gal (US) 11 l
Fuel Tank 24.8 gal (US) 94 l
Hydraulic System 13.2 gal (US) 50 l
Hydraulic Tank 10.3 gal (US) 39 l
Units: USMetric

Weights

Operating Weight 6567 lb 2979 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
ELECTRICAL
12 volt Electrical System
OPERATOR ENVIRONMENT
Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD screen; Advanced Multi-operator Security System; On-screen Adjustments for Implement Response, Hystat Response and Creep Control
POWER TRAIN
Cat C3.3B, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V Emission Standards
OTHER
Engine Enclosure, Lockable
MANDATORY EQUIPMENT
Hydraulics, Standard or High Flow

Request A Quote

© 2020 Toromont Industries Ltd. All Rights Reserved.
Copyright   Privacy Statement   Policies