Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level I

Wheel Base	49.2 in 1249 mm
Height - Top of Cab	83.1 in 2110 mm
Vehicle Width over Tires	66 in 1676 mm
Ground Clearance	8.9 in 226 mm
Departure Angle	26°
Maximum Dump Angle	39°
Bumper Overhang - Behind Rear Axle	42.6 in 1083 mm
Rack Back Angle - Maximum Height	96°
Length - Without Bucket	117.8 in 2993 mm
Maximum Overall Height	158.7 in 4032 mm
Maximum Reach - With Arms Parallel to Ground	54.6 in 1388 mm
Length - With Bucket on Ground	146 in 3708 mm
Turning Radius from Center - Coupler	55.2 in 1401 mm
Bucket Pin Height - Carry Position	7.9 in 200 mm
Bucket Pin Height - Maximum Lift	124.2 in 3154 mm
Clearance at Maximum Lift and Dump	97.1 in 2465 mm
Turning Radius from Center - Bucket	85.9 in 2181 mm
Turning Radius from Center - Machine Rear	71.2 in 1806 mm
Reach - Maximum Lift/Dump	23.6 in 600 mm
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Gross Power - SAE J1995	74.3 HP 55.4 kW
Net Power - SAE 1349	72.9 HP 54.4 kW
Displacement	203 in³ 3.3 l
Stroke	4.7 in 120 mm
Bore	3.7 in 94 mm
Peak Torque - 1,500 rpm - SAE J1995	195 ft·lbf 265 N·m
Engine Model	Cat C3.3B DIT (turbo)
Net Power - ISO 9249	73.7 HP 54.9 kW
Net Flywheel Power	72.9 HP 54.4 kW

Hydraulic Flow - Standard - Loader Hydraulic Pressure	3335 psi 23000 kPa
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	44 HP 33 kW
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure	4061 psi 28000 kPa
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)	76 HP 57 kW
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow	32 gal/min 121 l/min
Hydraulic Flow - Standard - Loader Hydraulic Flow	23 gal/min 86 l/min

Inside Cab*	81 dB(A)
Note (3)	**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab**	101 dB(A)
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)	*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Rated Operating Capacity	2200 lb 1000 kg
Tipping Load	4400 lb 2000 kg
Breakout Force - Tilt Cylinder	7355 lb 3336 kg
Rated Operating Capacity with Optional Counterweight	2410 lb 1095 kg
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Travel Speed - Forward or Reverse - One Speed	7.7 mile/h 12.5 km/h
Travel Speed - Forward or Reverse - Two Speed Option	11 mile/h 17.7 km/h

Chain Box - Each Side	3.3 gal (US) 12.7 l
Cooling System	3.7 gal (US) 14 l
Engine Crankcase	3 gal (US) 11 l
Fuel Tank	27.7 gal (US) 105 l
Hydraulic System	13.7 gal (US) 52 l
Hydraulic Tank	10.3 gal (US) 39 l

Operating Weight	7478 lb 3392 kg
Note	Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).