Skip to content

New CAT Equipment

Connect with our experts and get industry leading support and solutions for all your needs.

phone number1-866-606-1372

Give us a call Mon - Fri 8:00AM - 5:00PM

Connect with our experts and get industry leading support and solutions for all your needs.

Give us a call

Mon - Fri 8:00AM - 5:00PM

Skid Steer Loaders 272D3 XE

Built for tough work, the Cat® Skid Steer Loaders incorporate big iron features. These machines deliver reliability, durability, and efficient operation, even in the toughest working conditions.
Skid Steer Loaders

Skid Steer Loaders 272D3 XE

Built for tough work, the Cat® Skid Steer Loaders incorporate big iron features. These machines deliver reliability, durability, and efficient operation, even in the toughest working conditions.
Units: USMetric
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Units: USMetric
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
Units: USMetric
Wheel Base 54.6 in 1386 mm
Height - Top of Cab 84 in 2133 mm
Vehicle Width over Tires 76 in 1930 mm
Ground Clearance 10.4 in 263 mm
Departure Angle 28°
Maximum Dump Angle 51°
Bumper Overhang - Behind Rear Axle 46.2 in 1175 mm
Turning Radius from Center - Machine Rear 74.7 in 1899 mm
Length - Without Bucket 127 in 3226 mm
Reach - Maximum Lift/Dump 29 in 736 mm
Clearance at Maximum Lift and Dump 97.4 in 2474 mm
Bucket Pin Height - Maximum Lift 128.6 in 3265 mm
Bucket Pin Height - Carry Position 9.3 in 235 mm
Turning Radius from Center - Coupler 57.7 in 1466 mm
Bucket Pin Reach - Maximum Lift 13.5 in 344 mm
Rack Back Angle - Maximum Height 84°
Maximum Overall Height 161.5 in 4103 mm
Length - With Bucket on Ground 155 in 3937 mm
Maximum Reach - With Arms Parallel to Ground 49.1 in 1246 mm
Turning Radius from Center - Bucket (racked) 90.6 in 2301 mm
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 2036 mm (80 in) low profile bucket, no optional counterweights, Cat PC 14 × 17.5 tires and manual quick coupler (unless otherwise noted).
Roll Back Angle 28°
Units: USMetric
Gross Power - SAE J1995 110 HP 82 kW
Net Power - SAE 1349 106 HP 79 kW
Displacement 232 in³ 3.8 l
Stroke 4.7 in 120 mm
Bore 3.9 in 100 mm
Net Flywheel Power 106 HP 79 kW
Engine Model Cat C3.8 DIT (turbo)
Net Power - ISO 9249 107 HP 80 kW
Peak Torque - 1,500 rpm - SAE J1995 276 ft·lbf 374 N·m
Units: USMetric
Standard Flow Mode - Loader Hydraulic Pressure 3335 psi 23000 kPa
Standard Flow Mode - Hydraulic Power - Calculated 44 HP 33 kW
Standard Flow Mode - Loader Hydraulic Flow 23 gal/min 86 l/min
Note *When equipped with Cat 400 Series work tools.
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure 4061 psi 28000 kPa
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow* 40 gal/min 150 l/min
Hydraulic Flow - XE - Hydraulic Power (calculated) 94 HP 70 kW
Units: USMetric
Note (2) **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Outside Cab*** 104 dB(A) 104 dB(A)
Inside Cab** 83 dB(A) 83 dB(A)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3) ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Units: USMetric
Rated Operating Capacity 3700 lb 1680 kg
Tipping Load 7400 lb 3365 kg
Breakout Force - Tilt Cylinder 7362 lb 3339 kg
Breakout Force - Lift Cylinder 6085 lb 2760 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 2036 mm (80 in) low profile bucket, no optional counterweights, Cat PC 14 × 17.5 tires and manual quick coupler (unless otherwise noted).
Rated Operating Capacity with Optional Counterweight 3950 lb 1795 kg
Units: USMetric
Travel Speed - Forward or Reverse - One Speed 7.2 mile/h 11.6 km/h
Travel Speed - Forward or Reverse - Two Speed 10.3 mile/h 16.6 km/h
Units: USMetric
Cooling System 4.1 gal (US) 16 l
Engine Crankcase 3.5 gal (US) 13 l
Fuel Tank 31.7 gal (US) 120 l
Hydraulic System 14.5 gal (US) 55 l
Hydraulic Tank 10.3 gal (US) 39 l
Chain Box - Each Side 2.7 gal (US) 10.2 l
Diesel Exhaust Fluid (DEF) Tank 5 gal (US) 19 l
Units: USMetric
Operating Weight 9573 lb 4342 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 2036 mm (80 in) low profile bucket, no optional counterweights, Cat PC 14 × 17.5 tires and manual quick coupler (unless otherwise noted).
ELECTRICAL
12 volt Electrical System
OPERATOR ENVIRONMENT
Gauges: Fuel Level, DEF Level, Hour Meter
POWER TRAIN
Cat C3.8, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V Emission Standards
OTHER
Engine Enclosure, Lockable
MANDATORY EQUIPMENT
Quick Coupler, Mechanical or Powered

2021 Machine Attachment Discounts Web Banner

2022CustomerTestimonialsBannerEN

Featured Attachments

Caterpillar Attachments enhance the productivity and utility of Caterpillar machines, equipping them for a wide range of tasks and operating requirements, and providing total system solutions for any job application.

Request A Quote

Success! Thanks for filling out our form! Loading animation
Toromont Industries Ltd. All Rights Reserved.
Copyright   Privacy Statement   Policies   Accessibility   Supplier Code of Conduct