New CAT Equipment

Skid Steer Loaders 226D3

Built for tough work, the Caterpillar® Skid Steer Loaders incorporate big iron features. These machines deliver Cat reliability, durability, and efficient operation, even in the toughest working conditions.
226D3

Skid Steer Loaders 226D3

Built for tough work, the Caterpillar® Skid Steer Loaders incorporate big iron features. These machines deliver Cat reliability, durability, and efficient operation, even in the toughest working conditions.
Units: USMetric

Air Conditioning System (if equipped)

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Units: USMetric

Cab

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
Units: USMetric

Dimensions

Wheel Base 41.5 in 1054 mm
Length - With Bucket on Ground 127.3 in 3234 mm
Length - Without Bucket 99.4 in 2524 mm
Height - Top of Cab 79.8 in 2028 mm
Vehicle Width over Tires 58.9 in 1497 mm
Maximum Overall Height 143.8 in 3652 mm
Bucket Pin Height - Maximum Lift 110.9 in 2818 mm
Bucket Pin Height - Carry Position 8.5 in 215 mm
Reach - Maximum Lift/Dump 21 in 533 mm
Clearance at Maximum Lift and Dump 81.8 in 2077 mm
Ground Clearance 6.9 in 175 mm
Departure Angle 27.9°
Maximum Dump Angle 46.7°
Rack Back Angle - Maximum Height 88.9°
Bumper Overhang - Behind Rear Axle 35.2 in 8944 mm
Turning Radius from Center - Bucket 77.8 in 1977 mm
Maximum Reach - With Arms Parallel to Ground 50.7 in 1288 mm
Turning Radius from Center - Machine Rear 59.6 in 1513 mm
Turning Radius from Center - Coupler 43.5 in 1104 mm
Note * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Units: USMetric

Engine

Gross Power - SAE J1995 67.1 HP 50.1 kW
Net Power - SAE 1349 65.8 HP 49.1 kW
Displacement 134.3 in³ 2.2 l
Stroke 3.9 in 100 mm
Bore 3.3 in 84 mm
Engine Model Cat C2.2 CRDI
Peak Torque - 1,500 rpm - SAE J1995 153 ft·lbf 208 N·m
Net Power - ISO 9249 66.5 HP 49.6 kW
Units: USMetric

Hydraulic System

Hydraulic Flow - Standard - Loader Hydraulic Pressure 3336 psi 23000 kPa
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure 3336 psi 23000 kPa
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 33.5 HP 26.5 kW
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 50.9 HP 38 kW
Hydraulic Flow - Standard - Loader Hydraulic Flow 18 gal/min 69 l/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow 26 gal/min 99 l/min
Units: USMetric

Noise Level

Outside Cab*** 102 dB(A) 102 dB(A)
Inside Cab** 83 dB(A) 83 dB(A)
Note (3) ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Units: USMetric

Operating Specifications

Rated Operating Capacity 1550 lb 705 kg
Rated Operating Capacity with Optional Counterweight 1650 lb 750 kg
Tipping Load 3100 lb 1410 kg
Breakout Force - Tilt Cylinder 3927 lb 1781 kg
Note * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Units: USMetric

Power Train

Travel Speed - Forward or Reverse - One Speed 7.6 mile/h 12.3 km/h
Travel Speed - Forward or Reverse - Two Speed Option 11.1 mile/h 17.8 km/h
Units: USMetric

Service Refill Capacities

Chain Box - Each Side 1.8 gal (US) 7 l
Cooling System 3.2 gal (US) 12 l
Engine Crankcase 2.6 gal (US) 10 l
Fuel Tank 15.1 gal (US) 57 l
Hydraulic System 11.9 gal (US) 45 l
Hydraulic Tank 9 gal (US) 34 l
Units: USMetric

Weights

Operating Weight 5849 lb 2653 kg
Note * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
ELECTRICAL
12 volt Electrical System
OPERATOR ENVIRONMENT
Gauges: Fuel Level, Hour Meter
POWER TRAIN
Cat C2.2, Turbo Diesel Engine, Meeting Tier 4 Final and Stage IIIB* emission standards (*Stage IIIB engines comply with the transition provisions of the EU non-road emission regulation.)
OTHER
Engine Enclosure, Lockable
MANDATORY EQUIPMENT
Hydraulics, Standard or High Flow

Request A Quote

© 2020 Toromont Industries Ltd. All Rights Reserved.
Copyright   Privacy Statement   Policies