New CAT Equipment

Skid Steer Loaders 232D3

Built for tough work, the Caterpillar® Skid Steer Loaders incorporate big iron features. These machines deliver Cat reliability, durability, and efficient operation, even in the toughest working conditions.
232D3

Skid Steer Loaders 232D3

Built for tough work, the Caterpillar® Skid Steer Loaders incorporate big iron features. These machines deliver Cat reliability, durability, and efficient operation, even in the toughest working conditions.
Units: USMetric

Air Conditioning System (if equipped)

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Units: USMetric

Cab

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
Units: USMetric

Dimensions

Wheel Base 41.5 in 1054 mm
Height - Top of Cab 79.9 in 2029 mm
Vehicle Width over Tires 58.9 in 1497 mm
Ground Clearance 6.7 in 170 mm
Departure Angle 27.9°
Maximum Dump Angle 47.4°
Length - Without Bucket 99.3 in 2523 mm
Clearance at Maximum Lift and Dump 88.7 in 2254 mm
Bucket Pin Reach - Maximum Lift 8.8 in 224 mm
Maximum Overall Height 150.9 in 3832 mm
Turning Radius from Center - Machine Rear 59.6 in 1513 mm
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Bucket Pin Height - Carry Position 8.4 in 214 mm
Length - With Bucket on Ground 127.3 in 3233 mm
Bumper Overhang - Behind Rear Axle 35.2 in 894 mm
Turning Radius from Center - Bucket 77.8 in 1976 mm
Maximum Reach - With Arms Parallel to Ground 49.2 in 1249 mm
Bucket Pin Height - Maximum Lift 118.1 in 3001 mm
Reach - Maximum Lift/Dump 25.7 in 653 mm
Rack Back Angle - Maximum Height 88.2°
Turning Radius from Center - Coupler 43.4 in 1102 mm
Units: USMetric

Engine

Gross Power - SAE J1995 67.1 HP 50.1 kW
Net Power - SAE 1349 65.8 HP 49.1 kW
Displacement 134.3 in³ 2.2 l
Stroke 3.9 in 100 mm
Bore 3.3 in 84 mm
Peak Torque - 1,500 rpm - SAE J1995 153 ft·lbf 208 N·m
Net Flywheel Power 65.8 HP 49.1 kW
Net Power - ISO 9249 66.5 HP 49.6 kW
Engine Model Cat C2.2 CRDI
Units: USMetric

Hydraulic System

Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow 26 gal/min 99 l/min
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 35.5 HP 26.5 kW
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure 3336 psi 23000 kPa
Hydraulic Flow - Standard - Loader Hydraulic Flow 18 gal/min 69 l/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3336 psi 23000 kPa
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 50.9 HP 38 kW
Units: USMetric

Noise Level

Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab* 83 dB(A)
Outside Cab** 101 dB(A)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Units: USMetric

Operating Specifications

Rated Operating Capacity 1900 lb 865 kg
Tipping Load 3800 lb 1725 kg
Breakout Force - Tilt Cylinder 3928 lb 1782 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Rated Operating Capacity with Optional Counterweight 2000 lb 910 kg
Units: USMetric

Power Train

Travel Speed - Forward or Reverse - One Speed 7.6 mile/h 12.3 km/h
Travel Speed - Forward or Reverse - Two Speed Option 11.1 mile/h 17.8 km/h
Units: USMetric

Service Refill Capacities

Cooling System 3.2 gal (US) 12 l
Engine Crankcase 2.6 gal (US) 10 l
Fuel Tank 15.1 gal (US) 57 l
Hydraulic System 11.9 gal (US) 45 l
Hydraulic Tank 9 gal (US) 34 l
Chain Box - Each Side 1.8 gal (US) 7 l
Units: USMetric

Weights

Operating Weight 6514 lb 2955 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
ELECTRICAL
12 volt Electrical System
OPERATOR ENVIRONMENT
Gauges: Fuel Level, Hour Meter
POWER TRAIN
Cat C2.2, Turbo Diesel Engine, Meeting Tier 4 Final and Stage IIIB* emission standards (*Stage IIIB engines comply with the transition provisions of the EU non-road emission regulation.)
OTHER
Engine Enclosure, Lockable
MANDATORY EQUIPMENT
Hydraulics, Standard or High Flow

Request A Quote

© 2020 Toromont Industries Ltd. All Rights Reserved.
Copyright   Privacy Statement   Policies