Types (1)	Trunnion mounted planetary 55 degree steer axles.
Types (2)	High bias limited slip differential on front axle.

Boom Up	9.9 s 9.9 s
Boom Down	8.5 s 8.5 s
Tele In	14.6 s 14.6 s
Tele Out	14.5 s 14.5 s

Service Brakes	Inboard wet disc brakes on front and rear axles
Parking Brakes	Wet disc, spring applied hydraulic release on front axle

Engine Model	Cat® C3.4B
Gross Power - Basic	111 HP 83 kW
Note	Meets U.S. EPA Tier 4 Final emission standards.

Pump Type	Variable displacement load sensing axial piston pump
Auxiliary Hydraulic Pressure	3481 psi 240 bar
System Operating Pressure	3770 psi 260 bar
Note	Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
Auxiliary Hydraulic Flow	25 gal/min 94 l/min

Rated Load Capacity	9000 lb 4082 kg
Maximum Lift Height	43 ft 13100 mm
Maximum Forward Reach	31 ft 9.4 m
Top Travel Speed	19 mile/h 29.9 km/h
Frame Leveling	10°
Capacity at Maximum Height	7000 lb 3175 kg
Capacity at Maximum Reach	1200 lb 544 kg
Drawbar Pull - Loaded	21582 lbf 96 kN
Turning Radius - Over Tires	12 ft 3.7 m

Fuel Tank	38 gal (US) 145 l
Diesel Exhaust Fluid (DEF) Tank	5.7 gal (US) 21.5 l
Hydraulic System	47 gal (US) 177 l

Standard	370/75-28 Duraforce MT
Optional (1)	13.00 × 24 Foam Duraforce
Optional (2)	14 × 24-16 PR Air
Optional (3)	14 × 24-12 PR Foam

Forward	4 speed
Reverse	3 speed

Operating Weight

25750 lb 11680 kg

Carriages - Dual Fork Positioning	50 in 1270 mm
Pallet Forks - Option 3	[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Carriages - Wide Rotate	72 in 1829 mm
Carriages - Standard Rotate	50 in 1270 mm
Lumber Forks - Option 2	[2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Hydraulic IT Coupler	Includes Auxiliary Electrics
Pallet Forks - Option 2	[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Cubing Forks	[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Carriages - Wide Tilt	72 in 1829 mm
Carriages - Standard Tilt	50 in 1270 mm
Pallet Forks - Option 1	[2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)
Lumber Forks - Option 1	[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Carriages - Side Shift	48 in 1220 mm
Carriages - Swing	100°, 1829 mm, 4028 kg Capacity, 2268 kg Swung (100°, 72 in, 9,000 lb Capacity, 5,000 lb Swung)