Type (1)	Trunnion mounted planetary 55 degree steer axles.
Type (2)	High bias limited slip differential on front axle.

Boom Up	15 s 15 s
Boom Down	10.3 s 10.3 s
Tele In	9.5 s 9.5 s
Tele Out	16.3 s 16.3 s

Parking Brakes	Wet disc, spring applied hydraulic release on front axle
Service Brakes	Inboard wet disc brakes on front and rear axles

Height	8 ft 2430 mm
Width	8 ft 2470 mm
Wheel Base	11.25 ft 3430 mm
Length - Fork Face	18.5 ft 5639 mm
Ground Clearance	17 in 432 mm
Turning Radius - Over Tires	12 ft 3658 mm

Engine Model	Cat® C3.6L
Gross Power - Basic	73.7 HP 55 kW
Note	Meets U.S. EPA Tier 4 Final emission standards.

Gear Pump	Single-section
Auxiliary Hydraulic Pressure	3481 psi 240 bar
Auxiliary Hydraulic Flow	18 gal/min 68 l/min

Rated Load Capacity	6500 lb 2948 kg
Maximum Lift Height	42 ft 12.8 m
Maximum Forward Reach	30 ft 9.1 m
Top Travel Speed	19 mile/h 31 km/h
Drawbar Pull - Loaded	20670 lbf 92 kN
Turning Radius - Over Tires	12 ft 3.7 m
Frame Leveling	10°
Capacity at Maximum Height	6500 lb 2949 kg
Capacity at Maximum Reach	700 lb 317 kg

Fuel Tank	38.3 gal (US) 145 l
Hydraulic System	42 gal (US) 158 l

Standard	370/75-28 Duraforce Air
Optional (1)	370/75-28 Duraforce Foam Fill
Optional (2)	315/95-28 Telemaster Solid
Optional (3)	13.00-24 16PR Air
Optional (4)	13.00-24 12PR Foam
Optional (5)	370/75-28 Non-Marking Air
Optional	370/75-28 Non-Marking Foam

Forward	4 speed
Reverse	3 speed

Operating Weight

22002 lb 9980 kg

Carriages - Dual Fork Positioning	50 in 1270 mm
Pallet Forks - Option 2	[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Pallet Forks - Option 3	[2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)
Pallet Forks - Option 1	[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Cubing Forks	[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Carriages - Standard Tilt	50 in 1270 mm
Carriages - Side Shift	50 in 1270 mm
Carriages - Swing	100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Lumber Forks - Option 1	[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)