Skip to content

New CAT Equipment

 

Telehandlers TL943 w/Stabilizers

Cat® Telehandlers are designed to meet the varying needs of the construction and agricultural industries. The comprehensive range of standard features and optional equipment extends the scope for wider application use throughout the world.

Telehandlers TL943 w/Stabilizers

Cat® Telehandlers are designed to meet the varying needs of the construction and agricultural industries. The comprehensive range of standard features and optional equipment extends the scope for wider application use throughout the world.

Contact an Expert

Operating Hours: Monday to Friday 8:00am – 5:00pm

Units: USMetric

Boom Performance

Boom Up 9.9 s 9.9 s
Boom Down 8.5 s 8.5 s
Tele In 14.6 s 14.6 s
Tele Out 14.5 s 14.5 s
Drawbar Pull - Basic 22619 lb 100.65 kN
Drawbar Pull - Premium 25589 lb 114 kN
Units: USMetric

Brakes

Features Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle
Units: USMetric

Braking System

Parking Brake Spring-applied hydraulic release on front axle
Units: USMetric

Dimensions

Height 8.16 ft 2490 mm
Width 8 ft 2470 mm
Wheel Base 11.25 ft 3343 mm
Length - Fork Face 20.5 ft 6248 mm
Ground Clearance 17 in 432 mm
Turning Radius - Over Tires 12 ft 3.7 m
Units: USMetric

Engine

Engine Model Cat® C3.6L
Gross Power - Basic 73.7 HP 55 kW
Gross Power - Premium 111 HP 83 kW
Note *Meets U.S. EPA Tier 4 Final emission standards.
Units: USMetric

Instrumentation

Features Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water temperature gauge
Units: USMetric

Operating Specifications

Rated Load Capacity 9000 lb 4082 kg
Maximum Lift Height 43 ft 13.1 m
Load at Maximum Height - Stabilizers Down 7000 lb 3175 kg
Maximum Forward Reach 31 ft 9.4 m
Load at Maximum Reach - Stabilizers Down 2700 lb 1225 kg
Top Travel Speed 18 mile/h 29 km/h
Units: USMetric

Operator Station

Features Vinyl suspension seat, single electronic joystick, spacious interior, ergonomic cab
Units: USMetric

Service Refill Capacities

Fuel Tank 38 gal (US) 145 l
Hydraulic Tank 49 gal (US) 184 l
Units: USMetric

Tires

Standard 370/75-28 Duraforce Air
Optional (1) 370/75-28 Duraforce Foam Fill
Optional (2) 315/95-28 Telemaster Solid
Optional (3) 14.00-24 16PR Air
Optional (4) 14.00-24 12PR Foam
Optional (5) 370/75-28 Non-Marking Air
Optional 370/75-28 Non-Marking Foam
Units: USMetric

Weights

Operating Weight 26852 lb 12180 kg
Units: USMetric

Work Tools

Pallet Forks - Option 2 [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Cubing Forks [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Pallet Forks - Option 1 [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Carriages - Dual Fork Positioning 50 in 1270 mm
Carriages - Swing 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Carriages - Side Shift 50 in 1270 mm
Lumber Forks - Option 1 [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Carriages - Standard Tilt 50 in 1270 mm
Pallet Forks - Option 3 [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)
TELESCOPIC BOOM
Boom angle indicator
ELECTRICAL
Alternator, 60 amp, 12 volt
OPERATOR STATION
Canopy, ROPS/FOPS
POWER TRAIN
Engine, Cat C3.6L - 55kW (73.7 hp) or 83kW (111hp) gross horsepower
STRUCTURE
Chassis, frame level up to 10 degrees when operating in rough, uneven terrain
ANTI-FREEZE
Coolant - Anti-freeze, 50/50 Mix
TIRES
Tires - 370/75-28 Duraforce Air
OTHER EQUIPMENT
Integrated lift and tie down points

2021 Machine Attachment Discounts Web Banner

Featured Attachments

Caterpillar Attachments enhance the productivity and utility of Caterpillar machines, equipping them for a wide range of tasks and operating requirements, and providing total system solutions for any job application.

Request A Quote

Success! Thanks for filling out our form! Loading animation
Toromont Industries Ltd. All Rights Reserved.
Copyright   Privacy Statement   Policies   Accessibility