LOCATIONS InsideTRAC TRAINING EMPLOYMENT

New CAT Equipment

Compact Wheel Loaders 907M

Cat® Compact Wheel Loaders deliver high performance, versatility, and precision in any application.

Compact Wheel Loaders 907M

Cat® Compact Wheel Loaders deliver high performance, versatility, and precision in any application.
Units: USMetric

Buckets

Bucket Capacities 0.75-1.5 m3 (1.0-2.0 yd3)
Note All capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
Grapple 0.9 m³ (1.2 yd³) heaped
Multi-Purpose 0.75 m³ (1.0 yd³), 0.9 m³ (1.2 yd³), 1.05 m³ (1.37 yd³)
Light Material 1.2 m³ (1.6 yd³), 1.5 m³ (2.0 yd³)
General Purpose 0.8 m³ (1 yd³), 0.9 m³ (1.2 yd³), 1.0 m³ (1.3 yd³), 1.1 m³ (1.4 yd³), 1.3 m³ (1.7 yd³)
Units: USMetric

Cab

ROPS SAE J1040 MAY94, ISO 3471-1994.
FOPS SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
Note (2) When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of 66 dB(A) typical.
Note (1) Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Units: USMetric

Dimensions with Bucket (Approximate) - Standard Lift - With ISO Coupler

Note (2) **Vary with tire.
Departure Angle 33°
Height - Ground to Cab** 8.42 ft 2586 mm
Clearance - Level Bucket** 9.92 ft 3027 mm
Length - Overall* 17.92 ft 5469 mm
Dump Angle at Full Lift 45°
Dig Depth** 3.7 in 95 mm
Machine Width 6 ft 1840 mm
Operating Weight 12913 lb 5859 kg
Height - Ground Clearance** 11 in 300 mm
Reach - Bucket at 45°* 2.33 ft 725 mm
Turning Radius - Inside of Tires 7.33 ft 2240 mm
Width - Tread Center 4.58 ft 1420 mm
Note (1) *Vary with bucket.
Clearance - Bucket at 45° * 8.08 ft 2478 mm
Length - Wheel Base 7.08 ft 2170 mm
Note (3) Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Width - Bucket 6.67 ft 2045 mm
Height - Bucket Pin** 10.58 ft 3227 mm
Articulation Angle 39°
Turning Radius - Over Bucket 14.67 ft 4489 mm
Units: USMetric

Dimensions with Bucket (Approximate) - Standard Lift - With SSL Coupler

Clearance - Level Bucket** 9.92 ft 3035 mm
Width - Tread Center 4.58 ft 1420 mm
Machine Width 6 ft 1840 mm
Turning Radius - Inside of Tires 7.33 ft 2240 mm
Turning Radius - Over Bucket 14.67 ft 4473 mm
Length - Overall* 18.42 ft 5620 mm
Dig Depth** 4.2 in 107 mm
Operating Weight 12913 lb 5859 kg
Height - Bucket Pin** 10.58 ft 3227 mm
Note (2) **Vary with tire.
Note (3) Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Clearance - Bucket at 45° * 7.67 ft 2359 mm
Width - Bucket 6.67 ft 2045 mm
Height - Ground to Cab** 8.42 ft 2586 mm
Dump Angle at Full Lift 45°
Reach - Bucket at 45°* 2.67 ft 820 mm
Height - Ground Clearance** 11 in 300 mm
Length - Wheel Base 7.08 ft 2170 mm
Articulation Angle 39°
Departure Angle 33°
Note (1) *Vary with bucket.
Units: USMetric

Drive Train

Forward - Range 2 12 mile/h 20 km/h
Forward - High Range 22 mile/h 35 km/h
Reverse - Range 2 12 mile/h 20 km/h
Forward - Range 1 6 mile/h 10 km/h
Reverse - Range 1 6 mile/h 10 km/h
Reverse - High Range 22 mile/h 35 km/h
Units: USMetric

Engine

Maximum Gross Power 73 HP 54.6 kW
Net Power 74 HP 55.3 kW
Rated Net Power - 2,400 rpm - SAE J1349 73 HP 54.7 kW
Rated Net Power - 2,400 rpm - ISO 9249 (1977)/EEC 80/1269 74 HP 55.3 kW
Maximum Gross Power - ISO 14396 73 HP 54.6 kW
Maximum Gross Power - SAE J1995 74 HP 55 kW
Emissions *The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage V (Europe only) or U.S. EPA Tier 4 Final (North America only) emission standards.
Engine Model Cat® C3.3B DIT*
Stroke 4.7 in 120 mm
Bore 3.7 in 94 mm
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 191 ft·lbf 260 N·m
Note (4) Flywheel per the SAE reference conditions with the fan at maximum speed.
Displacement 201 in³ 3.3 l
Maximum Gross Torque - ISO 14396 192 ft·lbf 261 N·m
Note (6) Stage V engine available for Europe only.
Note (5) The Cat C3.3B DIT Tier 4 Final/Stage V uses an active regeneration system which requires no operator interaction under normal conditions.
Maximum Gross Power - DIN ISO 14396 74 HP 55 kW
Note (3) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (1) Net power ratings are tested at the reference conditions for the specified standard.
Note (2) Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed.
Units: USMetric

Engine - Tier 4 Final/Stage IV

Maximum Net Torque - SAE J1349 189 ft·lbf 257 N·m
Units: USMetric

Loader Hydraulic System

Relief Pressure - Tilt Cylinder Head 4496 psi 31000 kPa
3rd Function Maximum Working Pressure 3408 psi 23500 kPa
Maximum Flow - Implement Pump - Auxiliary Function Standard Flow 19 gal/min 73 l/min
Relief Pressure - Tilt Cylinder Rod 2756 psi 19000 kPa
Maximum Flow - Implement Pump 19 gal/min 73 l/min
Maximum Flow - Implement Pump - Auxiliary Function High Flow 31 gal/min 116 l/min
Maximum Working Pressure - Implement Pump 3408 psi 23500 kPa
Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height 3 s 3 s
Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level 2.6 s 2.6 s
Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level 2.6 s 2.6 s
Tilt Cylinder, Double Acting - Stroke 16.4 in 417 mm
Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift 5.5 s 5.5 s
Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift 9.6 s 9.6 s
Lift Cylinder, Double Acting - Rod Diameter 2 in 50 mm
Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time 9.6 s 9.6 s
Lift Cylinder, Double Acting - Stroke 27.4 in 695 mm
Lift Cylinder, Double Acting - Bore Diameter 3 in 75 mm
Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height 1.5 s 1.5 s
Tilt Cylinder, Double Acting - Rod Diameter 2.2 in 55 mm
Tilt Cylinder, Double Acting - Bore Diameter 3.5 in 90 mm
Boost Flow Maximum Pressure 3191 psi 22000 kPa
Units: USMetric

Operating Specifications

Rated Bucket Capacity 1.31 yd³ 1 m³
Clearance - Full Lift and 45° Dump 7.97 ft 2429 mm
Reach - Full Lift and 45° Dump 2.6 ft 792 mm
Steering Articulation Angle - Each Direction 39°
Full Turn Tipping Load 7716 lb 3500 kg
Tipping Load - Full Turn - ISO 14397-1 7339 lb 3330 kg
Tipping Load - Straight - ISO 14397-1 9007 lb 4087 kg
Units: USMetric

Service Refill Capacities

Engine Crankcase 3 gal (US) 11.2 l
Hydraulic System - Including Tank 18.5 gal (US) 70 l
Fuel Tank 20.6 gal (US) 78 l
Cooling System 4.5 gal (US) 16.5 l
Axles - Rear N/A
Axles - Front N/A
Transmission - Gear Box 2.2 gal (US) 8.5 l
Hydraulic Tank 12.2 gal (US) 46 l
Units: USMetric

Steering

Maximum Steering Torque - 0° (Straight Machine) 37155 ft·lbf 50375 N·m
Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm 3 s 3 s
Nominal Flow - Steering Pump 12 gal/min 43.9 l/min
Maximum Steering Torque - 39° (Full Turn) 27747 ft·lbf 37620 N·m
Steering Cylinder, Double Acting - Bore Diameter 3.1 in 80 mm
Steering Articulation Angle - Each Direction 39°
Maximum Working Pressure - Steering Pump 3191 psi 22000 kPa
Steering Cylinder, Double Acting - Rod Diameter 1.4 in 35 mm
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left <6 turns
Steering Cylinder, Double Acting - Stroke 11.8 in 300 mm
Units: USMetric

Tires

Note (4) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Option (2) 340/80 R18 AT-R Firestone
Option (7) 12.5/80 R18 Flexport™
Note (3) In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities.
Note (1) *Standard tire.
Option (1) 335/80 R18 XZSL Michelin
Option (6) 405/70 R18 SPT9 Dunlop*
Option (5) 340/80 R18 Bibload Michelin
Option (4) 340/80 R18 TRI2 Nokian
Option (3) 340/80 R18 XMCL Michelin
Note (2) Other tire choices available, contact your Cat dealer for details.
Units: USMetric

Weights

Operating Weight 12677 lb 5750 kg
Note Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort ROPS cab, standard flow hydraulics and skid-steer coupler. The 907M is configured with a 1.0 m³ (1.31 yd³) bucket with bolt-on cutting edge.
TRANSMISSION AND HYDRAULICS
18° frame oscillation, 78° articulation
ENGINE
Cat C3.3B DIT Tier 4 Final/Stage V (Europe only) or Tier 4 Final (North America only) emission standards
ELECTRICAL
Alternator 90 amp
GENERAL
E-coat paint primer
OPERATOR ENVIRONMENT
Adjustable internal mirror

Request A Quote

© 2020 Toromont Industries Ltd. All Rights Reserved.
Copyright   Privacy Statement   Policies