LOCATIONS InsideTRAC TRAINING EMPLOYMENT

New CAT Equipment

Compact Wheel Loaders 914M

Cat® Compact Wheel Loaders deliver high performance, versatility, and precision in any application.

Compact Wheel Loaders 914M

Cat® Compact Wheel Loaders deliver high performance, versatility, and precision in any application.
Units: USMetric

Axles

Front Fixed; Locking differential (standard)
Rear Oscillating �11 degrees; Locking differential (Standard)
Units: USMetric

Buckets

Bucket Capacities 1.3-1.9 m3 (1.7-2.5 yd3)
Units: USMetric

Cab

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level II
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (4) *The measurements were conducted with the cab doors and windows closed.
Units: USMetric

Engine

Maximum Gross Power 100 HP 74 kW
Net Power 97 HP 72 kW
Maximum Gross Power - SAE J1995 102 HP 76 kW
Rated Net Power - Rated Engine Speed 2200 r/min 2200 r/min
Rated Net Power - SAE J1349 96 HP 72 kW
Maximum Gross Power - ISO 14396 100 HP 74 kW
Maximum Gross Power - Maximum Engine Speed 2350 r/min 2350 r/min
Maximum Gross Power - ISO 14396 (DIN) 101 HP 74 kW
Engine Model Cat C4.4 ACERT�
Emissions Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Stroke 5 in 127 mm
Displacement 268 in³ 4.4 l
Maximum Gross Torque - SAE J1995 336 ft·lbf 455 N·m
Rated Net Power - ISO 9249 97 HP 72 kW
Maximum Gross Torque - ISO 14396 332 ft·lbf 450 N·m
Rated Net Power - ISO 9249 (DIN) 98 HP 72 kW
Bore 4.13 in 105 mm
Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Units: USMetric

Engine - Tier 4 Final/Stage IV

Maximum Net Torque - SAE J1349 325 ft·lbf 441 N·m
Maximum Net Torque - ISO 9249 329 ft·lbf 446 N·m
Units: USMetric

Loader Hydraulic System

Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s 1.4 s
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 32 gal/min 120 l/min
Maximum Flow - Implement Pump 39 gal/min 148 l/min
Relief Pressure - Tilt Cylinder 4931 psi 34000 kPa
Hydraulic Cycle Time - Rackback 2.2 s 2.2 s
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046 psi 21000 kPa
Hydraulic Cycle Time - Total Cycle Time 12.5 s 12.5 s
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046 psi 21000 kPa
Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24 gal/min 90 l/min
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s 5.2 s
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 24 gal/min 90 l/min
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s 3.7 s
Maximum Working Pressure - Implement Pump 4061 psi 28000 kPa
Units: USMetric

Operating Specifications

Rated Bucket Capacity 2.5 yd³ 1.9 m³
Units: USMetric

Service Refill Capacities

Cooling System 5.7 gal (US) 21.5 l
Fuel Tank 40.7 gal (US) 154 l
Hydraulic System - Including Tank 25.9 gal (US) 98 l
Engine Crankcase 2.3 gal (US) 8.8 l
Diesel Exhaust Fluid (DEF) Tank 5 gal (US) 18.9 l
Axles - Front Center Differential 2 gal (US) 7.5 l
Transmission 0.9 gal (US) 3.4 l
Hydraulic Tank 14.5 gal (US) 55 l
Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Rear Center Differential 2 gal (US) 7.5 l
Units: USMetric

Steering

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns 3.75 turns
Maximum Working Pressure - Steering Pump 3263 psi 22500 kPa
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8 s 2.8 s
Maximum Flow - Steering Pump 22 gal/min 82 l/min
Steering Articulation Angle - Each Direction 40 ° 40 °
Units: USMetric

Tires

Other Choices Include 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Standard Size 17.5-25 12PR
Note (2) In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Note (1) Other tire choices are available. Contact your Cat dealer for details.
Units: USMetric

Transmission

Forward and Reverse - High Range 25 mile/h 40 km/h
Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Low Range, Speed Range 1* 6.3 mile/h 10 km/h
Forward and Reverse - Low Range, Speed Range 2* 12.5 mile/h 20 km/h
Units: USMetric

Weights

Operating Weight 19315 lb 8761 kg

Request A Quote

© 2020 Toromont Industries Ltd. All Rights Reserved.
Copyright   Privacy Statement   Policies