New CAT Equipment

Compact Wheel Loaders 910

Cat® Compact Wheel Loaders deliver high performance, versatility, and precision in any application.

Compact Wheel Loaders 910

Cat® Compact Wheel Loaders deliver high performance, versatility, and precision in any application.
Units: USMetric

Axles

Front Fixed; Locking differential (standard)
Rear Oscillating ±11 degrees; Locking differential (Standard)
Units: USMetric

Buckets

Bucket Capacities 1.3-1.9 m3 (1.7-2.5 yd3)
Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³)
Units: USMetric

Cab

ROPS ISO 3471:2008
FOPS EN ISO 3449:2008 (ISO 3449:2005)
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4) *The measurements were conducted with the cab doors and windows closed.
Units: USMetric

Engine

Maximum Gross Power 110 HP 82 kW
Bore 3.86 in 98 mm
Maximum Gross Power - Maximum Engine Speed 2350 r/min 2350 r/min
Maximum Net Torque - ISO 9249 327 ft·lbf 443 N·m
Maximum Gross Power - SAE J1995 111 HP 83 kW
Maximum Gross Torque - SAE J1995 335 ft·lbf 454 N·m
Maximum Gross Torque - ISO 14396 332 ft·lbf 450 N·m
Rated Net Power - ISO 9249 98 HP 73 kW
Rated Net Power - ISO 9249 (DIN) 99 HP 73 kW
Stroke 4.72 in 120 mm
Engine Model Cat C3.6
Maximum Gross Power - ISO 14396 110 HP 82 kW
Rated Net Power - Rated Engine Speed 2200 r/min 2200 r/min
Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Rated Net Power - SAE J1349 99 HP 74 kW
Maximum Net Torque - SAE J1349 329 ft·lbf 446 N·m
Displacement 220 in³ 3.6 l
Maximum Gross Power - ISO 14396 (DIN) 111 HP 82 kW
Emissions Engine meets Tier 4 Final/Stage V emission standards.
Units: USMetric

Loader Hydraulic System

Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s 1.4 s
Hydraulic Cycle Time - Total Cycle Time 12.5 s 12.5 s
Maximum Working Pressure - Implement Pump 3408 psi 23500 kPa
Relief Pressure - Tilt Cylinder 4931 psi 34000 kPa
Hydraulic Cycle Time - Rackback 2.2 s 2.2 s
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046 psi 21000 kPa
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s 5.2 s
Maximum Flow - Implement Pump 32 gal/min 122 l/min
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046 psi 21000 kPa
Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24 gal/min 90 l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow 24 gal/min 90 l/min
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s 3.7 s
Units: USMetric

Service Refill Capacities

Cooling System 5.7 gal (US) 21.5 l
Fuel Tank 43.6 gal (US) 165 l
Hydraulic System - Including Tank 25.9 gal (US) 98 l
Hydraulic Tank 14.5 gal (US) 55 l
Transmission 0.8 gal (US) 3.2 l
Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Front Center Differential 2 gal (US) 7.5 l
Axles - Rear Center Differential 2 gal (US) 7.5 l
Engine Crankcase 2.6 gal (US) 10 l
Diesel Exhaust Fluid (DEF) Tank 4.8 gal (US) 18 l
Units: USMetric

Steering

Maximum Working Pressure - Steering Pump 2683 psi 18500 kPa
Steering Articulation Angle - Each Direction 40 ° 40 °
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 3.2 s 3.2 s
Maximum Flow - Steering Pump 17 gal/min 66 l/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns 3.75 turns
Units: USMetric

Tires

Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Standard Size 15.5 R25 L2 XTLA
Other Choices Include 17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1) Other tire choices are available. Contact your Cat dealer for details.
Units: USMetric

Transmission

Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3 25 mile/h 40 km/h
Forward and Reverse - Speed Range 2* 12.5 mile/h 20 km/h
Forward and Reverse - Speed Range 1* 6.3 mile/h 10 km/h
Units: USMetric

Weights

Operating Weight 18102 lb 8109 kg

Request A Quote

Success! Thanks for filling out our form! Loading animation
© 2020 Toromont Industries Ltd. All Rights Reserved.
Copyright   Privacy Statement   Policies