Rear	Oscillating ±11 degrees; Locking differential (Standard)
Front	Fixed; Locking differential (standard)

Bucket Capacities	1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose	1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material	2.5-3.5 m³ (3.3-4.6 yd³)

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005
Note (4)	*The measurements were conducted with the cab doors and windows closed.
Note (2)	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Maximum Gross Power	110 HP 82 kW
Rated Net Power - Rated Engine Speed	2200 r/min 2200 r/min
Maximum Gross Power - Rated Engine Speed	1800 r/min 1800 r/min
Rated Net Power - SAE J1349	99 HP 74 kW
Maximum Gross Power - ISO 14396 (metric)	112 HP 112 HP
Rated Net Power - ISO 9249	98 HP 73 kW
Maximum Gross Torque - SAE J1995	335 ft·lbf 454 N·m
Maximum Gross Torque - ISO 14396	332 ft·lbf 450 N·m
Maximum Net Torque - SAE J1349	329 ft·lbf 446 N·m
Maximum Net Torque - ISO 9249	327 ft·lbf 443 N·m
Displacement	220 in³ 3.6 l
Bore	3.85 in 98 mm
Stroke	4.72 in 120 mm
Engine Model	Cat C3.6
Emissions	Engine meets Tier 4 Final/Stage V emission standards.
Note	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - ISO 14396	110 HP 82 kW

Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure	3046 psi 21000 kPa
Maximum Flow - Implement Pump	39 gal/min 148 l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	24 gal/min 90 l/min
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure	3046 psi 21000 kPa
Hydraulic Cycle Time - Total Cycle Time	12.5 s 12.5 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	5.2 s 5.2 s
Maximum Flow - Implement Pump - 4th Function, Maximum Flow	24 gal/min 90 l/min
Hydraulic Cycle Time - Dump, at Maximum Reach	1.4 s 1.4 s
Relief Pressure - Tilt Cylinder	4931 psi 34000 kPa
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	32 gal/min 120 l/min
Maximum Working Pressure - Implement Pump	4061 psi 28000 kPa
Hydraulic Cycle Time - Rackback	2.2 s 2.2 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	3.7 s 3.7 s

Cooling System	5.7 gal (US) 21.5 l
Fuel Tank	43.6 gal (US) 165 l
Note	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Rear Center Differential	2 gal (US) 7.5 l
Hydraulic System - Including Tank	25.9 gal (US) 98 l
Diesel Exhaust Fluid (DEF) Tank	4.8 gal (US) 18 l
Engine Crankcase	2.6 gal (US) 10 l
Hydraulic Tank	14.5 gal (US) 55 l
Transmission	0.8 gal (US) 3.2 l
Axles - Front Center Differential	2 gal (US) 7.5 l

Maximum Flow - Steering Pump	22 gal/min 82 l/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	3.75 turns 3.75 turns
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	2.8 s 2.8 s
Maximum Working Pressure - Steering Pump	3263 psi 22500 kPa
Steering Articulation Angle - Each Direction	40 ° 40 °

Recyclability

95%

Other Choices Include	17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
Note (1)	Other tire choices are available. Contact your Cat dealer for details.
Standard Size	17.5 R25 L2 XTLA
Note (3)	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2)	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Note	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3	25 mile/h 40 km/h
Forward and Reverse - Speed Range 1*	6.3 mile/h 10 km/h
Forward and Reverse - Speed Range 2*	12.5 mile/h 20 km/h

Operating Weight

19103 lb 8668 kg