New CAT Equipment

Compact Track Loaders 249D3

Cat® Compact Track Loaders feature a steel embedded track and steel undercarriage components for maximum life in applications where maintenance, operator technique and underfoot conditions may not be ideally suited for a Multi Terrain Loader or Skid Steer Loader.
249D3

Compact Track Loaders 249D3

Cat® Compact Track Loaders feature a steel embedded track and steel undercarriage components for maximum life in applications where maintenance, operator technique and underfoot conditions may not be ideally suited for a Multi Terrain Loader or Skid Steer Loader.
Units: USMetric

Air Conditioning System (if equipped)

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Units: USMetric

Cab

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
Units: USMetric

Dimensions

Length - Track on Ground 54.5 in 1384 mm
Overall Length - Track 71.2 in 1808 mm
Height - Top of Cab 80.3 in 2039 mm
Ground Clearance 7.6 in 194 mm
Departure Angle 34.5°
Maximum Dump Angle 48°
Vehicle Width (400 mm/15.7 in tracks) 69.1 in 1756 mm
Length - With Bucket on Ground 127.3 in 3233 mm
Maximum Overall Height 150.8 in 3831 mm
Bucket Pin Height - Carry Position 8.6 in 219 mm
Maximum Reach - With Arms Parallel to Ground 51.8 in 1317 mm
Length - Without Bucket 99.3 in 2523 mm
Turning Radius from Center - Machine Rear 57.4 in 1458 mm
Bucket Pin Height - Maximum Lift 118.2 in 3002 mm
Clearance at Maximum Lift and Dump 88.7 in 2253 mm
Vehicle Width (320 mm/12.6 in tracks) 66 in 1676 mm
Turning Radius from Center - Coupler 45.7 in 1160 mm
Reach - Maximum Lift/Dump 28.6 in 727 mm
Rack Back Angle - Maximum Height 87.5°
Turning Radius from Center - Bucket 81.1 in 2060 mm
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C0 cab (OROPS, static seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Bucket Pin Reach - Maximum Lift 12.2 in 311 mm
Units: USMetric

Engine

Gross Power - SAE J1995 67.1 HP 50.1 kW
Displacement 134.3 in³ 2.2 l
Bore 3.3 in 84 mm
Stroke 3.9 in 100 mm
Net Power - ISO 9249 66.5 HP 49.6 kW
Net Power 65.8 HP 49.1 kW
Net Power - SAE 1349 65.8 HP 49.1 kW
Peak Torque - 1,500 rpm - SAE J1995 153 ft·lbf 208 N·m
Engine Model Cat C2.2 CRDI
Units: USMetric

Hydraulic System

Hydraulic Flow - Standard - Loader Hydraulic Pressure 3336 psi 23000 kPa
Hydraulic Flow - High Flow - Loader Hydraulic Flow 26 gal/min 99 l/min
Hydraulic Flow - High Flow - Loader Hydraulic Pressure 3336 psi 23000 kPa
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 50.9 HP 38 kW
Hydraulic Flow - Standard - Loader Hydraulic Flow 18 gal/min 69 l/min
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 35.5 HP 26.5 kW
Units: USMetric

Noise Level

Outside Cab*** 103 dB(A) 103 dB(A)
Inside Cab** 83 dB(A) 83 dB(A)
Note (3) ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (2) **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Units: USMetric

Operating Specifications

Rated Operating Capacities - 35% Tipping Load 1740 lb 790 kg
Tipping Load 4970 lb 2260 kg
Breakout Force - Tilt Cylinder 3907 lb 1772 kg
Ground Contact Area - With 320 mm/12.6 in Track 1373 in² 0.89 m²
Ground Pressure - With 320 mm/12.6 in Track 5.7 psi 39.3 kPa
Ground Contact Area - With 400 mm/15.7 in Track 1716 in² 1.11 m²
Ground Pressure - With 400 mm/15.7 in Track 4.7 psi 32.2 kPa
Rated Operating Capacities - 50% Tipping Load 2485 lb 1130 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C0 cab (OROPS, static seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Rated Operating Capacity with Optional Counterweight 2700 lb 1225 kg
Units: USMetric

Power Train

Travel Speed - Forward or Reverse - One Speed 5 mile/h 8.1 km/h
Travel Speed - Forward or Reverse - Two Speed 7.6 mile/h 12.2 km/h
Units: USMetric

Service Refill Capacities

Engine Crankcase 2.6 gal (US) 10 l
Fuel Tank 15.1 gal (US) 57 l
Hydraulic System 11.9 gal (US) 45 l
Cooling System 3.2 gal (US) 12 l
Hydraulic Tank 9 gal (US) 34 l
Units: USMetric

Weights

Operating Weight 7831 lb 3552 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C0 cab (OROPS, static seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
ELECTRICAL
12 volt Electrical System
OPERATOR ENVIRONMENT
Gauges: Fuel Level, Hour Meter
POWER TRAIN
Cat C2.2, Turbo Diesel Engine, Meeting Tier 4 Final and Stage IIIB* emission standards (*Stage IIIB engines comply with the transition provisions of the EU non-road emission regulation.)
OTHER
Engine Enclosure, Lockable
MANDATORY EQUIPMENT
Hydraulics, Standard or High Flow

Request A Quote

© 2020 Toromont Industries Ltd. All Rights Reserved.
Copyright   Privacy Statement   Policies