New CAT Equipment

Compact Track Loaders 259D3

Cat® Compact Track Loaders feature a steel embedded track and steel undercarriage components for maximum life in applications where maintenance, operator technique and underfoot conditions may not be ideally suited for a Multi Terrain Loader or Skid Steer Loader.
259D3

Compact Track Loaders 259D3

Cat® Compact Track Loaders feature a steel embedded track and steel undercarriage components for maximum life in applications where maintenance, operator technique and underfoot conditions may not be ideally suited for a Multi Terrain Loader or Skid Steer Loader.

$ CASH PRICE

Or choose to finance below:

Please select your financing term (months):

Please select your down payment percentage:

Calculate

Down Payment

$0

Total

$0

Per Month

$0

Please ask about our Equipment Protection Plans (EPP), Customer Value Agreements (CVA) and Cat Work Tools that are also available with this machine.

Applicable Sales Taxes are not included. Terms and conditions may apply.

Units: USMetric

Air Conditioning System (if equipped)

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Units: USMetric

Cab

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
Units: USMetric

Dimensions

Length - Track on Ground 59 in 1499 mm
Overall Length - Track 78.7 in 1999 mm
Height - Top of Cab 83.1 in 2111 mm
Ground Clearance 8.9 in 226 mm
Departure Angle 35°
Maximum Dump Angle 52°
Bucket Pin Height - Carry Position 7.8 in 198 mm
Vehicle Width (400 mm/15.7 in tracks) 69 in 1755 mm
Turning Radius from Center - Coupler 54.8 in 1392 mm
Bucket Pin Reach - Maximum Lift 9.4 in 238 mm
Vehicle Width (320 mm/12.6 in tracks) 66 in 1676 mm
Maximum Reach - With Arms Parallel to Ground 51.4 in 1305 mm
Maximum Overall Height 154.1 in 3915 mm
Turning Radius from Center - Bucket 86 in 2184 mm
Bucket Pin Height - Maximum Lift 121 in 3075 mm
Length - Without Bucket 108.9 in 2767 mm
Rack Back Angle - Maximum Height 87°
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Turning Radius from Center - Machine Rear 61.5 in 1561 mm
Length - With Bucket on Ground 137.3 in 3486 mm
Clearance at Maximum Lift and Dump 89.9 in 2283 mm
Reach - Maximum Lift/Dump 23.9 in 608 mm
Units: USMetric

Engine

Gross Power - SAE J1995 74.3 HP 55.4 kW
Displacement 203 in³ 3.3 l
Net Power 73.2 HP 54.6 kW
Bore 3.7 in 94 mm
Engine Model Cat C3.3B DIT (turbo)
Gross Power 74.3 HP 55.4 kW
Net Power - SAE 1349 73.2 HP 54.6 kW
Stroke 4.7 in 120 mm
Peak Torque - 1,500 rpm - SAE J1995 195 ft·lbf 265 N·m
Net Power - ISO 9249 73.9 HP 55.1 kW
Units: USMetric

Hydraulic System

Hydraulic Flow - High Flow - Loader Hydraulic Pressure 3335 psi 23000 kPa
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 58 HP 43 kW
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3335 psi 23000 kPa
Hydraulic Flow - Standard - Loader Hydraulic Flow 20 gal/min 76 l/min
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 39 HP 29 kW
Hydraulic Flow - High Flow - Loader Hydraulic Flow 30 gal/min 112 l/min
Units: USMetric

Noise Level

Note (3) ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab*** 103 dB(A) 103 dB(A)
Inside Cab** 83 dB(A) 83 dB(A)
Note (2) **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Units: USMetric

Operating Specifications

Rated Operating Capacities - 35% Tipping Load 2010 lb 915 kg
Tipping Load 5745 lb 2610 kg
Breakout Force - Tilt Cylinder 4965 lb 2252 kg
Ground Contact Area - With 320 mm/12.6 in Track 1483 in² 0.96 m²
Ground Pressure - With 320 mm/12.6 in Track 6.1 psi 41.8 kPa
Rated Operating Capacities - 50% Tipping Load 2870 lb 1305 kg
Ground Contact Area - With 400 mm/15.7 in Track 1848 in² 1.19 m²
Rated Operating Capacity with Optional Counterweight 3060 lb 1390 kg
Ground Pressure - With 400 mm/15.7 in Track 4.9 psi 34 kPa
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Units: USMetric

Power Train

Travel Speed - Forward or Reverse - One Speed 5.9 mile/h 9.5 km/h
Travel Speed - Forward or Reverse - Two Speed 8.5 mile/h 13.7 km/h
Units: USMetric

Service Refill Capacities

Hydraulic System 13.2 gal (US) 50 l
Fuel Tank 24.8 gal (US) 94 l
Engine Crankcase 3 gal (US) 11 l
Hydraulic Tank 10.3 gal (US) 39 l
Cooling System 3.7 gal (US) 14 l
Units: USMetric

Weights

Operating Weight 8987 lb 4076 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
ELECTRICAL
12 volt Electrical System
OPERATOR ENVIRONMENT
Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD screen; Advanced Multi-operator Security System; On-screen Adjustments for Implement Response, Hystat Response, and Creep Control
POWER TRAIN
Cat C3.3B, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V Emission Standards
OTHER
Engine Enclosure, Lockable
MANDATORY EQUIPMENT
Hydraulics, Standard or High Flow

Request A Quote

© 2020 Toromont Industries Ltd. All Rights Reserved.
Copyright   Privacy Statement   Policies