New CAT Equipment

Compact Track Loaders 289D3

Cat® Compact Track Loaders feature a steel embedded track and steel undercarriage components for maximum life in applications where maintenance, operator technique and underfoot conditions may not be ideally suited for a Multi Terrain Loader or Skid Steer Loader.
289D3

Compact Track Loaders 289D3

Cat® Compact Track Loaders feature a steel embedded track and steel undercarriage components for maximum life in applications where maintenance, operator technique and underfoot conditions may not be ideally suited for a Multi Terrain Loader or Skid Steer Loader.
Units: USMetric

Air Conditioning System (if equipped)

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.
Units: USMetric

Cab

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
Units: USMetric

Dimensions

Length - Track on Ground 64.2 in 1630 mm
Overall Length - Track 83.8 in 2129 mm
Height - Top of Cab 83.2 in 2113 mm
Ground Clearance 8.9 in 226 mm
Departure Angle 33°
Maximum Dump Angle 51°
Clearance at Maximum Lift and Dump 94 in 2387 mm
Turning Radius from Center - Machine Rear 70.7 in 1796 mm
Length - Without Bucket 117.9 in 2995 mm
Maximum Reach - With Arms Parallel to Ground 50 in 1270 mm
Turning Radius from Center - Bucket 88.8 in 2256 mm
Bucket Pin Height - Carry Position 7.5 in 190 mm
Turning Radius from Center - Coupler 55.5 in 1410 mm
Bucket Pin Height - Maximum Lift 125.1 in 3178 mm
Reach - Maximum Lift/Dump 30 in 761 mm
Length - With Bucket on Ground 146.2 in 3714 mm
Maximum Overall Height 158.1 in 4015 mm
Rack Back Angle - Maximum Height 84°
Bucket Pin Reach - Maximum Lift 14.5 in 369 mm
Vehicle Width (450 mm/17.7 in tracks) 78 in 1981 mm
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Units: USMetric

Engine

Gross Power - SAE J1995 74.3 HP 55.4 kW
Net Power - SAE 1349 72.9 HP 54.4 kW
Displacement 203 in³ 3.3 l
Bore 3.7 in 94 mm
Stroke 4.7 in 120 mm
Net Power 72.9 HP 54.4 kW
Engine Model Cat C3.3B DIT (turbo)
Peak Torque - 1,500 rpm - SAE J1995 195 ft·lbf 265 N·m
Net Power - ISO 9249 73.7 HP 54.9 kW
Units: USMetric

Hydraulic System

Hydraulic Flow - Standard - Hydraulic Power (Calculated) 44 HP 33 kW
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure 4061 psi 28000 kPa
Hydraulic Flow - Standard - Loader Hydraulic Flow 23 psi 86 kPa
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) 76 HP 57 kW
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3335 psi 23000 kPa
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow 32 gal/min 121 l/min
Units: USMetric

Noise Level

Note (2) **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Outside Cab*** 103 dB(A) 103 dB(A)
Inside Cab** 83 dB(A) 83 dB(A)
Note (3) ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Units: USMetric

Operating Specifications

Rated Operating Capacities - 35% Tipping Load 2890 lb 1315 kg
Tipping Load 8255 lb 3750 kg
Breakout Force - Tilt Cylinder 7291 lb 3307 kg
Rated Operating Capacity with Optional Counterweight 4370 lb 1985 kg
Rated Operating Capacities - 50% Tipping Load 4130 lb 1880 kg
Ground Pressure - With 450 mm/17.7 in Track 4.7 psi 32.2 kPa
Ground Contact Area - With 450 mm/17.7 in Track 2272 in² 1.47 m²
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Units: USMetric

Power Train

Travel Speed - Forward or Reverse - Two Speed 8.3 mile/h 13.3 km/h
Travel Speed - Forward or Reverse - One Speed 4.5 mile/h 7.2 km/h
Units: USMetric

Service Refill Capacities

Cooling System 3.7 gal (US) 14 l
Engine Crankcase 3 gal (US) 11 l
Fuel Tank 27.7 gal (US) 105 l
Hydraulic System 13.7 gal (US) 52 l
Hydraulic Tank 10.3 gal (US) 39 l
Units: USMetric

Weights

Operating Weight 10688 lb 4848 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
ELECTRICAL
12 volt Electrical System
OPERATOR ENVIRONMENT
Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD screen; Advanced Multi-operator Security System; On-screen Adjustments for Implement Response, Hystat Response and Creep Control
POWER TRAIN
Cat C3.3B, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V Emission Standards
OTHER
Engine Enclosure, Lockable
MANDATORY EQUIPMENT
Hydraulics, Standard or High Flow XPS

Request A Quote

© 2020 Toromont Industries Ltd. All Rights Reserved.
Copyright   Privacy Statement   Policies