New CAT Equipment

Compact Track Loaders 299D3 XE Land Management

Cat® Compact Track Loaders feature a steel embedded track and steel undercarriage components for maximum life in applications where maintenance, operator technique and underfoot conditions may not be ideally suited for a Multi Terrain Loader or Skid Steer Loader.
299D3 XE Land Management

Compact Track Loaders 299D3 XE Land Management

Cat® Compact Track Loaders feature a steel embedded track and steel undercarriage components for maximum life in applications where maintenance, operator technique and underfoot conditions may not be ideally suited for a Multi Terrain Loader or Skid Steer Loader.
Units: USMetric

Air Conditioning System (if equipped)

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Units: USMetric

Cab

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
Units: USMetric

Dimensions

Length - Track on Ground 69.6 in 1767 mm
Overall Length - Track 89.4 in 2270 mm
Height - Top of Cab 83.6 in 2125 mm
Ground Clearance 9.6 in 245 mm
Departure Angle 33°
Maximum Dump Angle 54°
Turning Radius from Center - Coupler 58.1 in 1476 mm
Turning Radius from Center - Machine Rear 74 in 1881 mm
Vehicle Width (400 mm/15.7 in tracks) 76 in 1931 mm
Turning Radius from Center - Bucket (racked) 91.1 in 2314 mm
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with polycarbonate door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, triple flange front/rear idlers, and manual quick coupler.
Length - Without Bucket 125.5 in 3189 mm
Bucket Pin Reach - Maximum Lift 19.4 in 493 mm
Clearance at Maximum Lift and Dump 94.5 in 2399 mm
Rack Back Angle - Maximum Height 81°
Vehicle Width (450 mm/17.7 in tracks) 78 in 1982 mm
Maximum Overall Height 158.7 in 4032 mm
Reach - Maximum Lift/Dump 33.6 in 852 mm
Length - With Bucket on Ground 154.7 in 3931 mm
Maximum Reach - With Arms Parallel to Ground 51.9 in 1319 mm
Bucket Pin Height - Maximum Lift 126.3 in 3208 mm
Bucket Pin Height - Carry Position 7.1 in 180 mm
Roll Back Angle 25°
Units: USMetric

Engine

Gross Power - SAE J1995 110 HP 82 kW
Net Power - SAE 1349 106 HP 79 kW
Displacement 232 in³ 3.8 l
Bore 3.9 in 100 mm
Stroke 4.7 in 120 mm
Net Power 106 HP 79 kW
Net Power - ISO 9249 107 HP 80 kW
Engine Model Cat C3.8 DIT (turbo)
Peak Torque - 1,500 rpm - SAE J1995 276 ft·lbf 374 N·m
Units: USMetric

Hydraulic System

Standard Flow Mode - Loader Hydraulic Flow 23 gal/min 86 l/min
Standard Flow Mode - Loader Hydraulic Pressure 3335 psi 23000 kPa
Standard Flow Mode - Hydraulic Power - Calculated 44 HP 33 kW
Hydraulic Flow - XE - Hydraulic Power (calculated) 94 HP 70 kW
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow* 40 gal/min 150 l/min
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure 4061 psi 28000 kPa
Note *When equipped with Cat 400 Series work tools.
Units: USMetric

Noise Level

Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Inside Cab* 83 dB(A) 83 dB(A)
Outside Cab** 104 dB(A) 104 dB(A)
Note (1) Sealed and pressurized cab is standard in North America and Europe.
Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Units: USMetric

Operating Specifications

Rated Operating Capacities - 35% Tipping Load 4340 lb 1975 kg
Tipping Load 12400 lb 5635 kg
Breakout Force - Tilt Cylinder 7270 lb 3298 kg
Breakout Force - Lift Cylinder 6162 lb 2795 kg
Ground Pressure - With 450 mm/17.7 in Track 5.2 psi 35.8 kPa
Rated Operating Capacities - 50% Tipping Load 6200 lb 2820 kg
Ground Contact Area - With 400 mm/15.7 in Track 2171 in² 1.41 m²
Ground Contact Area - With 450 mm/17.7 in Track 2443 in² 1.58 m²
Ground Pressure - With 400 mm/15.7 in Track 5.9 psi 40.5 kPa
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with polycarbonate door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, triple flange front/rear idlers, and manual quick coupler.
Units: USMetric

Power Train

Travel Speed - Forward or Reverse - Two Speed 8.3 mile/h 13.3 km/h
Travel Speed - Forward or Reverse - One Speed 5.5 mile/h 8.9 km/h
Units: USMetric

Service Refill Capacities

Cooling System 4.1 gal (US) 16 l
Engine Crankcase 3.5 gal (US) 13 l
Fuel Tank 58 gal (US) 220 l
Hydraulic System 14.5 gal (US) 55 l
Hydraulic Tank 10.3 gal (US) 39 l
Diesel Exhaust Fluid (DEF) Tank 5 gal (US) 19 l
Units: USMetric

Weights

Operating Weight 12764 lb 5790 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with polycarbonate door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, triple flange front/rear idlers, and manual quick coupler.
ELECTRICAL
12 volt Electrical System
OPERATOR ENVIRONMENT
Gauges: Fuel Level, DEF Level, Hour Meter
POWER TRAIN
Cat C3.8, Turbo Diesel Engine, Meeting U.S. EPA Tier 4 Final and EU Stage IV Emission Standards
OTHER
Engine Enclosure, Lockable
MANDATORY EQUIPMENT
Quick Coupler, Mechanical or Powered

Request A Quote

© 2020 Toromont Industries Ltd. All Rights Reserved.
Copyright   Privacy Statement   Policies